I have an older Simplicity 16GTH with the old style flip up and lock PTO switch on the dashboard. If you look at the link below the diagram shows the old style PTO switch and it says the new push/pull switch replaces it.
https://www.partstree.com/parts/sim...tor-16hp-hydro/electrical-group-main-harness/
The issue is that the new switches are 8 prong divided into 3 rows (all prongs are straight). My switch is a 5 prong, with 3 of the prongs canted at a 45 degree angle on the ends. You can actually see the wiring harness in the link above and the slated prongs in the harness. It doesnt look like the new switch in the link above would even begin to hook up to the wiring harness. I have searched high and low for one of the older switches and I havent been able to find one.
Looking for some advice on how to replace the old switch when the replacement in the diagram doesnt have the same number of prongs or order of prongs. Thanks!
https://www.partstree.com/parts/sim...tor-16hp-hydro/electrical-group-main-harness/
The issue is that the new switches are 8 prong divided into 3 rows (all prongs are straight). My switch is a 5 prong, with 3 of the prongs canted at a 45 degree angle on the ends. You can actually see the wiring harness in the link above and the slated prongs in the harness. It doesnt look like the new switch in the link above would even begin to hook up to the wiring harness. I have searched high and low for one of the older switches and I havent been able to find one.
Looking for some advice on how to replace the old switch when the replacement in the diagram doesnt have the same number of prongs or order of prongs. Thanks!