Case 444, Is this the right place to get help/info?

Hitechluddite

Active Member
Joined
Dec 14, 2018
Threads
24
Messages
90
This is a larger frame mower early mid 80's I believe I was told it had a 14HP Kohler K321 engine. This engine was also used in deere 212, 214 & 216 of the same age. Would an engine out of a Deere drop right in the Case?
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,647
Any engine will drop right in & bolt right up provided the shaft diameter & length is the same.
They are standardised.
So measure your shaft diameter should be a even eighth 1" 1-1/8" 1-1/4"
Wiring is a different matter.
Control plate will transfer from your old engine to the new one
 

Hitechluddite

Active Member
Joined
Dec 14, 2018
Threads
24
Messages
90
Any engine will drop right in & bolt right up provided the shaft diameter & length is the same.
They are standardised.
So measure your shaft diameter should be a even eighth 1" 1-1/8" 1-1/4"
Wiring is a different matter.
Control plate will transfer from your old engine to the new one

Thanks for the info! Soon as the weather breaks we will finish putting the John Deere 111 together and be ready to start another project.
 

Mad Mackie

Lawn Addict
Joined
Jul 11, 2011
Threads
50
Messages
1,851
Thanks for the info! Soon as the weather breaks we will finish putting the John Deere 111 together and be ready to start another project.
Go to casecoltingersoll.com as this site specializes in these tractors.
 

Hitechluddite

Active Member
Joined
Dec 14, 2018
Threads
24
Messages
90
  • / Case 444, Is this the right place to get help/info?
Thanks, we ended up going with an Allis Chalmers 914H
 

Bunnysax

Forum Newbie
Joined
Aug 25, 2022
Threads
0
Messages
1
I am not certain i obtain it.
What concerning clarifying it differently?
 
Top