MTD front wheel bushings

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Of ALL the things in life I have lost,.....................I miss my MIND the most!

Heard you lost your arse a few times too! ..:laughing:..:laughing:
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
I don't know if it is possible, but would having bronze bushings all the way
thru the hub rather than at the ends provide a better system?
 
Last edited:

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
I don't know if it is possible, but would having bronze bushings all the way
thru the hub rather than at the ends provide a better system?

I would think, a properly fitted FULL-LENGTH bushing would be a better choice, any room to drill and tap the wheel hub for a zerk..??
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
I would think, a properly fitted FULL-LENGTH bushing would be a better choice, any room to drill and tap the wheel hub for a zerk..??

It would have to be drilled at an angle...

McMaster has the bushing stock in 3", 6 1/2" and 13" lengths....
I have to check the bore size thru the hub.
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
It would have to be drilled at an angle...

McMaster has the bushing stock in 3", 6 1/2" and 13" lengths....
I have to check the bore size thru the hub.

Time for some Measuring & Machining, BUT .. the end result may be rewarding, however in your case, you'll probably sit down with a case of Brewski's and say... Screw-It ! .. :laughing:..:laughing:
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
I received and installed the bronze flange bushings today.
Oilites on the inside and super oilites on the outers. I hope I got that right..
anyway, I had to press them in with the hydraulic press, then had to clean up the spindles
to get them on. A tight fit all the way around. (the old plastic bushings practically fell out...some actually did!)
I made sure to grease things up really well.
Now we see how ling they last..................
 
Top