Honda Lawn Mower HRR2168VKA

khoituyen@yahoo.com

Forum Newbie
Joined
Aug 16, 2018
Threads
1
Messages
1
I recently replaced the drive belt. During the process, I accidentally removed the wrong bolts on the transmission assembly which caused some oil leak from the assembly. As a result, I had to remove the transmission assembly and removed and refilled the oil. The lawnmower seems to work fine when the engine is running. However I noticed that it does not move freely as it used to be when the engine is off. Should I re-grease the rear wheel axle? Any advice is appreciated. Thank you
 

Catherine

LawnWorld Support
Staff member
Joined
Jun 13, 2015
Threads
2
Messages
1,683
:welcome:

I'm going to move this thread over to our Honda section to see if we can find you some advice.
 

wackjeber

Forum Newbie
Joined
Aug 18, 2018
Threads
1
Messages
3
Adjust your drive cable according to the manual. It's available on Hondas website. Your drive belt tension changed because of the new belt. I suspect your transmission is fine.
 
Top