Husqvarna YTH 2348 Mower deck will not engage

J

jwf1124

Forum Newbie

Joined

Sep 23, 2017

Threads

2

Messages

3

• Aug 9, 2018 / Husqvarna YTH 2348 Mower deck will not engage

• #1

Husvarna YTH 2348 will run but mower deck will not engage. Replaced PTO switch and electric clutch. Battery is fully charged, all pulleys easily spin. Any ideas?

 

mhavanti

Well-Known Member

Joined

Oct 12, 2014

Threads

12

Messages

924

• Aug 9, 2018 / Husqvarna YTH 2348 Mower deck will not engage

• #2

Check continuity of your wires from the switches thru the connectors and trace to the end runs. If there is lack of continuity anywhere in the circuit, your clutch will not engage.

 

L

Luffydog

Well-Known Member

Joined

Jan 31, 2018

Threads

6

Messages

566

• Aug 9, 2018 / Husqvarna YTH 2348 Mower deck will not engage

• #3

There is another topic in the husqvarna forum that is titled the same thinking it might be same post as there with the same op with same issue as here.

 

J

jwf1124

Forum Newbie

Joined

Sep 23, 2017

Threads

2

Messages

3

• Aug 13, 2018 / Husqvarna YTH 2348 Mower deck will not engage

• #4

mhavanti said:

Check continuity of your wires from the switches thru the connectors and trace to the end runs. If there is lack of continuity anywhere in the circuit, your clutch will not engage.

Click to expand...

Thanks for your reply. I have power going to connector to new electric clutch. Deck will still not engage. The tractor runs but mower deck will not engage. Could it be a faulty seat switch?

 

mhavanti

Well-Known Member

Joined

Oct 12, 2014

Threads

12

Messages

924

• Aug 13, 2018 / Husqvarna YTH 2348 Mower deck will not engage

• #5

Sorry I wasn't clearer on the checking thru the connectors. Yes, check all your safety switches as well as making sure that the shifting linkage isn't out of adjustment and may have the reverse a bit out of kilter as far as that switch goes if it has that one. Some mowers don't cut in reverse without hitting the override switch somehow. Any of those switches may cause a problem.

Max