YBRmuggsLP21
Forum Newbie
- Joined
- Jun 18, 2018
- Threads
- 1
- Messages
- 2
Hey all,
I've been trying to get my push mower running properly, and have been unsuccessful thus far. Basically, if I run the throttle anywhere between (roughly) half to full, it the engine will start surging. It will sometimes stop when just idling, but then as soon as I actually start cutting, it will do it again. Seems to run okay under half throttle with maybe a little popping here and there.
So far I have cleaned and rebuilt the carburetor, replaced the air filter and spark plug, and replaced the fuel cap. (It also has fresh gas and oil). What else should I be looking into?
Thanks!
Nick
I've been trying to get my push mower running properly, and have been unsuccessful thus far. Basically, if I run the throttle anywhere between (roughly) half to full, it the engine will start surging. It will sometimes stop when just idling, but then as soon as I actually start cutting, it will do it again. Seems to run okay under half throttle with maybe a little popping here and there.
So far I have cleaned and rebuilt the carburetor, replaced the air filter and spark plug, and replaced the fuel cap. (It also has fresh gas and oil). What else should I be looking into?
Thanks!
Nick