Have a 1992 Dixon 429 bought this spring and used it twice. While mowing it just up and died for no apparent reason and upon investigating found the part of the wiring harness under the key fell down and the end with the relay was ran through the chain and sprocket destroying the relay, connector, and pulling some of the wires out of the connector.
Bought a new relay and it has 5 prongs, mangled connector looks like it had 5 prongs but only 4 were used. I have 2 loose yellow (1 to ing. switch, other to ?) wires and 1 white wire and looks like 2 may have been jumpered in the connector. Trying to splice new wires with connectors to the old wiring and relay. White wire is obvious with the mangled connector but anybody know where the yellow wires hook up to on the relay?
Stopped at a former Dixon dealer and he wasn't too interested in giving me any information on what goes were with the relay wiring.
Bought a new relay and it has 5 prongs, mangled connector looks like it had 5 prongs but only 4 were used. I have 2 loose yellow (1 to ing. switch, other to ?) wires and 1 white wire and looks like 2 may have been jumpered in the connector. Trying to splice new wires with connectors to the old wiring and relay. White wire is obvious with the mangled connector but anybody know where the yellow wires hook up to on the relay?
Stopped at a former Dixon dealer and he wasn't too interested in giving me any information on what goes were with the relay wiring.