missing drine plug?

ice

Active Member
Joined
Apr 6, 2016
Threads
10
Messages
85
Hello all.
I have brought a Poulan mower. that needed a lot of work. I am almost done with it. I have some small loose ends.

There are 2 holes on the transmission .the one with the hex does not belong there. Falls off. Does anyone know what size bolt goes there
? And where to get it?
I hope the pictures are clear enough
 

Attachments

  • DSCN1415.jpg
    DSCN1415.jpg
    112.3 KB · Views: 13
  • DSCN1414.jpg
    DSCN1414.jpg
    71.2 KB · Views: 13
  • DSCN1413.jpg
    DSCN1413.jpg
    56.6 KB · Views: 13
  • DSCN1412.jpg
    DSCN1412.jpg
    132.1 KB · Views: 12
  • DSCN1411.jpg
    DSCN1411.jpg
    146.8 KB · Views: 11
  • DSCN1410.jpg
    DSCN1410.jpg
    98 KB · Views: 8
  • DSCN1409.jpg
    DSCN1409.jpg
    137.9 KB · Views: 9
  • DSCN1408.jpg
    DSCN1408.jpg
    174 KB · Views: 5

ILENGINE

Lawn Pro
Joined
May 6, 2010
Threads
39
Messages
9,866
that is where the transmission vent goes. It is actually two parts. Part number 70109 and 70110 which are hydrogear part numbers. Go see your mower dealer, they should also be a hydrogear dealer.
 

ice

Active Member
Joined
Apr 6, 2016
Threads
10
Messages
85
Hello ILengine,
Thank you so much for the info.
would you have a picture of that by chance?
 

ILENGINE

Lawn Pro
Joined
May 6, 2010
Threads
39
Messages
9,866
it looks like from another diagram that there is a 4 inch piece of hose/tubing between those two parts. part 532142564 can't locate picture of part. if you get the other parts you should be able to come up with a piece of black rubber heavy wall tubing to use to raise the vent up out of the way.
 

ice

Active Member
Joined
Apr 6, 2016
Threads
10
Messages
85
thank you so much
do you have your own shop? I am starting a new thread on the belts. they are both the wrong size. I would like to order all the parts from the same place.
 
Top