The Daily Yardman Thread

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

I knew that one would wake you up.

WHEEEEEEEeeeeeeeeeeeeeeee .. Dogeeeeeeeeeeee !! .. :thumbsup:..:l:thumbsup:..:thumbsup:

I Know !! .. you guys in a GOOOOOOOD mood cause it's Friday, .. ::wink:
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
Compressor operating pressure

OK.
Looks like the big honkin' 5hp 2 stage compressor is working.

The prior owner has the cut off switch set at about 110psi or so.
This unit should be good to 175#.
Should I adjust the switch to a higher pressure than where it is currently set?
I realize that higher tank pressure will give longer air draw at the useful 60# range I'm using,
but am not sure if the rest of the system will like higher pressure.
Will a higher pressure put more strain on the pump/motor??
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: Compressor operating pressure

OK.
Looks like the big honkin' 5hp 2 stage compressor is working.

The prior owner has the cut off switch set at about 110psi or so.
This unit should be good to 175#.
Should I adjust the switch to a higher pressure than where it is currently set?
I realize that higher tank pressure will give longer air draw at the useful 60# range I'm using,
but am not sure if the rest of the system will like higher pressure.
Will a higher pressure put more strain on the pump/motor??

I'm not familiar with "building" a system, but I understand your concerns, this MIGHT .. be of some help ......... Boo

https://fix-my-compressor.com/compressor-pressure-switch-adjustment/

I DON'T usually try to help a douche bag BUT seeins ya posted a pretty damn good girlie photo I WILL make an exception just this once .. 20a6980289a7a60364a23f462ad7ed16--smiley-faces-emoticon.jpg
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
Re: Compressor operating pressure

I'm not familiar with "building" a system, but I understand your concerns, this MIGHT .. be of some help ......... Boo

https://fix-my-compressor.com/compressor-pressure-switch-adjustment/

System already built, Kimosabe.....
Me want know how it should be adjusted.

I DON'T usually try to help a douche bag BUT seeins ya posted a pretty damn good girlie photo I WILL make an exception just this once .. View attachment 39855

Me rather be douche bag than enema bag..........
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: Compressor operating pressure

System already built, Kimosabe.....
Me want know how it should be adjusted.



Me rather be douche bag than enema bag..........

Same thing....... different nozzles, whichever you prefer, maybe SCUM-BAG woulda been a better choice !! .. :laughing:..:laughing:

There is a section on adjusting the pressure regulator, READ TFM ..
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
Re: Compressor operating pressure

There is a section on adjusting the pressure regulator, READ TFM ..

Ya....they say NOT to change the factory settings.............
Then they talk about adjusting settings of a replacement switch to match those of the original.......
These do not really address my situation, as someone else had already adjusted the switch.........
Near as I can find out, the original factory setting was cut off @175psi........
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: Compressor operating pressure

Ya....they say NOT to change the factory settings.............
Then they talk about adjusting settings of a replacement switch to match those of the original.......
These do not really address my situation, as someone else had already adjusted the switch.........
Near as I can find out, the original factory setting was cut off @175psi........

175 psi... HMmmmmm I sure hope ya got a functional press. relief valve,
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

Ya know for your blasting purposes, 100 - 125 psi should be more than adequate,I would worry more about cfm per min.
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

Goooooooooooooooooooooooooooooood Mornin Chuck .. 8cb184f5920f56d3064b45824b6cc251 (Medium).jpg

Gooooooooooood Mornin Gang, N U 2 Num Nuts .. image_25.jpeg

Thought 4 2day .. 1UU.JPG
 

BlazNT

Lawn Pro
Joined
Apr 26, 2012
Threads
28
Messages
6,973
Re: MTD Yardman Transaxle Rebuild

Posts: 7,158
Views: 353,181

Total views 416
 
Top