The Daily Yardman Thread

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

G'Mornin Hinder-Finder ..bc1a054ad7ac05b619726d22cd583099.jpg

G'Mornin Guys .. 1109347694.jpg

Thought 4 2day .. ac10ed4a2733a8eceb981d15f05477ec.jpg
 

BlazNT

Lawn Pro
Joined
Apr 26, 2012
Threads
28
Messages
6,973
Re: MTD Yardman Transaxle Rebuild

Xmark update:
Worked on my blown intake manifold gasket this weekend. I received all the parts need to put her back together. I started by removing all the old gasket from everything. That was near impossible. I spent over 4 hours trying to remove everything. Finally got it all off but in doing so I noticed that everything was not flat. It was not warped from heat it was cast wrong. Where the intake manifold gasket broke it was 4/1000 off from to outer edge. That explains why it blew out. I then started checking all the services for flatness. I am sure I did not use the correct word for that but I am ok with it. Kawasaki quality pssssst. So I decked all the surfaces that were not flat and put it all back together until I got to the carb. It was getting dark and cold. When I get more time I will put the carb and radiator back on and start her back up. While I was in there I looked at the cylinder walls and I am going to start saving money for a new engine next year because this one is going to start burning oil soon. I am thinking it will not last another 200 hours. Kawasaki quality PSSSST.
So lets sum this all up. Parts that are not cast correctly and premature wear in the cylinder bore. That is on a very expensive engine said to be of the highest quality. I have never like Kawasaki engines mostly because of the high price for parts but now I have another reason to not like them.
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

Xmark update:
Worked on my blown intake manifold gasket this weekend. I received all the parts need to put her back together. I started by removing all the old gasket from everything. That was near impossible. I spent over 4 hours trying to remove everything. Finally got it all off but in doing so I noticed that everything was not flat. It was not warped from heat it was cast wrong. Where the intake manifold gasket broke it was 4/1000 off from to outer edge. That explains why it blew out. I then started checking all the services for flatness. I am sure I did not use the correct word for that but I am ok with it. Kawasaki quality pssssst. So I decked all the surfaces that were not flat and put it all back together until I got to the carb. It was getting dark and cold. When I get more time I will put the carb and radiator back on and start her back up. While I was in there I looked at the cylinder walls and I am going to start saving money for a new engine next year because this one is going to start burning oil soon. I am thinking it will not last another 200 hours. Kawasaki quality PSSSST.
So lets sum this all up. Parts that are not cast correctly and premature wear in the cylinder bore. That is on a very expensive engine said to be of the highest quality. I have never like Kawasaki engines mostly because of the high price for parts but now I have another reason to not like them.

HEY Hinder Finder, NOW that's more like it, it's for sure they DON'T build em like in the good ol days, SHAMEFUL !!
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
Re: MTD Yardman Transaxle Rebuild

Howdy Rumpster, Boobot and everybody else.
Trying to choose a cam for my 350 build.
So much to learn..............

Dunno if I have previously posted this one or not:

girlmower5.jpg
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

Howdy Rumpster, Boobot and everybody else.
Trying to choose a cam for my 350 build.
So much to learn..............

Dunno if I have previously posted this one or not:

View attachment 41480

YEP seen it B 4 no big deal, .. trouble with Chevy small blocks ( actually ALL chevy eng. ) they been around since Noah's Ark,.. there's so much info, ( good & bad ) its too confusing at times, research and patience is what pays off, IF.. I was to put an engine in a street car (truck) and wanted to have some more (tiger in the tank) than the average bear, I would just buy a ( crate-motor" ) all built, and forget all the hassles, but I did enjoy that schitt in my younger days, was fun to have a few guys tossin ideas back N forth, and everyone puttin a street machine together N helpin each other build their version of their desired result...
 

Ronno6

Lawn Addict
Joined
Apr 8, 2016
Threads
24
Messages
1,933
Re: MTD Yardman Transaxle Rebuild

YEP seen it B 4 no big deal, .. trouble with Chevy small blocks ( actually ALL chevy eng. ) they been around since Noah's Ark,.. there's so much info, ( good & bad ) its too confusing at times, research and patience is what pays off, IF.. I was to put an engine in a street car (truck) and wanted to have some more (tiger in the tank) than the average bear, I would just buy a ( crate-motor" ) all built, and forget all the hassles, but I did enjoy that schitt in my younger days, was fun to have a few guys tossin ideas back N forth, and everyone puttin a street machine together N helpin each other build their version of their desired result...

Too late for crate.......too deep into the build...
Pretty set on most stuff but cam and intake.
I gotta select stuff that will play nice together.............

I do want performance, but I still gotta drive the thing every now and then.
 
Joined
Jul 22, 2017
Threads
21
Messages
2,154
Re: MTD Yardman Transaxle Rebuild

I think you're lying to us, I'm thinkin you're makin feeelthy, sleeeezy porn vids ... :laughing:..:laughing:..:laughing:

Naw I tried that once and 1 really fine chick showed up for a interview and about 10 dudes... So I picked a muscular guy and naturally the chick...

When we were ready to film a week later the 2 people showed up on time...... I asked them if they were ready and both said yes we are... The girl was getting undressed and the guy was doing the same....

I told him Whoa Whoa what you doing ???? He said getting undressed.... I said for what you are the camera man I am the Male star in this video ..... LMAO ................

Plus Tard Mon Ami ~!~!

What you think about that one Buddy ???
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

Naw I tried that once and 1 really fine chick showed up for a interview and about 10 dudes... So I picked a muscular guy and naturally the chick...

When we were ready to film a week later the 2 people showed up on time...... I asked them if they were ready and both said yes we are... The girl was getting undressed and the guy was doing the same....

I told him Whoa Whoa what you doing ???? He said getting undressed.... I said for what you are the camera man I am the Male star in this video ..... LMAO ................

Plus Tard Mon Ami ~!~!

What you think about that one Buddy ???

BOU, you're gettin to be like Ron, with the smart-arse come=backs .. :thumbsup:..:laughing:..:laughing:
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

G'Mornin Hinder-Finder .. 97888e79da275aa40c4231b6c95b93bb (Medium).jpg

G'Mornin Guys .. 146baf680f48e90e7df57a58f7502b68 (Medium).jpg

Thought 4 2day .. e5cf9911485f7a18ad8634d9341dc7e4.jpg
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Re: MTD Yardman Transaxle Rebuild

Been busy tryin to finish up projects from summer, before it gets too cold to work outside, fixin front and back porch wood steps and painting, trimming and cuttin down a few trees, workin on the vehicles, gettin SOME lawn equipment ready for winter storage, purging out some things for wifeys yard-sale ( I just know I'm gonna THAT thing again...some day :laughing: ) pressure cleaning siding and front driveway apron, and a guzillion Honey-Do's .... I thought when ya retired ya sat around watchin TV or built ships in a bottle, lay-back and listen to good tunes on the stereo, I don't believe I worked a 40 hr. week, and got soooo much more done after work and on the week-ends ... what gives ...??? ....:confused3:..:confused2:
 
Top