Robrote
Forum Newbie
- Joined
- Oct 1, 2014
- Threads
- 2
- Messages
- 3
I'm in a full on battle with my Stihl FS90R. It's running poorly so I decided to dig in and rebuild the carb, then I replaced the carb, did the plug and adjusted the valves. No carbon issues in the muffler.
So, while it was idling on the bench, I took some carb cleaner and sprayed around the carb mounting surface and it immediately stalled. I have pulled the carb and changed gaskets, changed carbs, no luck. Same issue. I also pulled the intake off and cleaned everything up. The gasket looked good and I didn't have a replacement for that.
What's my next step? gasket sealer on everything? Any help would be appreciated.
So, while it was idling on the bench, I took some carb cleaner and sprayed around the carb mounting surface and it immediately stalled. I have pulled the carb and changed gaskets, changed carbs, no luck. Same issue. I also pulled the intake off and cleaned everything up. The gasket looked good and I didn't have a replacement for that.
What's my next step? gasket sealer on everything? Any help would be appreciated.