You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SNAPPER LAWN TRACTOR LT160H42HBV2
- Thread starter maybe
- Start date
More options
Export threadalso the OPERATOR PRESENCE AND PTO RELAY WAS INSTALLED NEW as wellMy PTO disengages while cutting and i turn off and then back on the PTO switch and it engages for awhile. new PTO switch has not solved the issue. Any suggestions, thanks
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
PTO will only dissengage if
1) it gets too hot
2) voltage drops below 10V
3) momentary break in either + or - wire
4) one of the safety switches is faulty or there is a short in one of the safety circuits wires.
1) it gets too hot
2) voltage drops below 10V
3) momentary break in either + or - wire
4) one of the safety switches is faulty or there is a short in one of the safety circuits wires.
PTO will only dissengage if
1) it gets too hot
2) voltage drops below 10V
3) momentary break in either + or - wire
4) one of the safety switches is faulty or there is a short in one of the safety circuits wires.
thank you, its appreciated.