self propelled mower change over to a non self propelled frame

M

moedawg55

Forum Newbie

Joined

Apr 21, 2013

Threads

1

Messages

2

• Apr 21, 2013 / self propelled mower change over to a non self propelled frame

• #1

Is there a way to install a self propelled on to a Non self propelled frame?

The frame is a Murray M2255fc 22"

The self propelled engine is a 5.0hp B&S YBSXS 1901VC

 

I

ILENGINE

Lawn Pro

Joined

May 6, 2010

Threads

39

Messages

9,958

• Apr 21, 2013 / self propelled mower change over to a non self propelled frame

• #2

The engine will bolt to the deck no problem. the only thing you need to determine is the crankshaft length and diameter the same. cable length could be a consideration as well.

 

M

moedawg55

Forum Newbie

Joined

Apr 21, 2013

Threads

1

Messages

2

• Apr 21, 2013 / self propelled mower change over to a non self propelled frame

• #3

ILENGINE said:

The engine will bolt to the deck no problem. the only thing you need to determine is the crankshaft length and diameter the same. cable length could be a consideration as well.

Click to expand...

For the crankshaft there are ways around that, I havnt gone deep into it yet, but going to see if I can pull the pulley out, if so then I will drop it in and work from there, cable length may be a issue but not sure till its install, and there are way around the cable issue