Search results

Either a bad ACR on the cam or a valve adjustment is needed , both have the symptom you described , but a bad ACR on those Inteks are more common than a valve adjustment ......

I will speak for everyone that replied to your post ,Most of us are not on here anymore , but I check in every now and then ..... GLAD the info helped out ..... I go live every now and then on my you tube channel with friends and we do the same thing on there as I did on this forum .... I go by...

So many chiming in now are missing the original question, which is: "Where does one find this tool AND for a reasonable price?" All you have to do is make the phone call.... https://www.whitesfarmsupply.com/buy-parts/STIHL-Part-5910-890-2314-SCREWDRIVER-7535232/

A head gasket will not leak oil , BUT a Valve cover gasket will leak oil and drip under it to the side of the engine block in most cases and then down to the bottom of the engine at the base ....

Hey Hey There Scrub , I said hi to you about a month ago or so Guess you didn't see my reply to a problematic but simple fix people were making a big deal over ...

If your ACR on the cam took a dump.... I wouldn't run that engine at all. Those lil pieces will cause more damage ...... It does pay to tear it down and replace the the cam instead of swapping to a new engine ..... I have sold many of cams for those model engines.....

Star Tech has put the correct diode info on here ..... Some 1 wire units use the 1 amp Such as 1N4002 and then the larger stators use the 3 amp as shown in the DATA sheet which would be the 1N5401........ If your diodes keep blowing then something is wrong in the stator or your coils .....

I agree with the people that are saying NEEDLE , Or there is some varnish / gum build up on the seat. those VITON tips on the needles are etho proof so says the company......... A combo of seat and head gasket is suspect..... Hello to all my ole friends here on the forum !~! Later from...

Hey guys and ???? Got to be correct nowadays LOL.......... I finally got AT&T out here at my place and got HOOKED UP........ So I am glad of of that.......... Now I got to catch up on making videos and keeping certain people straight on here LOL.......... Plus Tard Mes Amies ~!~!

A lil while back I made a comment on a thread concerning a repair on a newer style E series engine.... I said Briggs had advertised a newer no change oil engine just add.... Some people just shook their head and almost called me a fool, wanting me to supply proof..... A few others had...

I won't be on here often like I was before.... My watermelon season has started so I will be busy with that...... I will be on here in the mornings and then the evenings like always though........ Here is the reason why........ https://youtu.be/Mzly5qH4mho

I won't be on here often like I was before.... My watermelon season has started so I will be busy with that...... I will be on here in the mornings and then the evenings like always though........ Here is the reason why........ https://youtu.be/Mzly5qH4mho Plus tard Mes Amies ...

I have no idea, but I will find out tomorrow and post the results..... Monday, Lee brought a push mower over to the big shop... He called me and told me that the rope was slacking and wasn't acting right, He said the engine ran fine though..... He also said a couple bolts were...

While we have a few pump issues up on here I will add FUEL to the FIRE LOL........ While I was on vacation, I brought a carb kit for a PW for my buddy David that owns the house we stayed at down in Chauvin, La... I got the engine running like a brand new penny shines....... We hooked it up...

I am back from vacation........ I cut it short a couple days so I could rest LOL ........ Working a shrimp net is not easy...

Well here we go again with a Ethanol Carb.... here is a video I made earlier....... Enjoy ......... https://youtu.be/mwUSZZFXAZs

Ok ya'll might think I'm joking but I'm not....... I don't have the model number of the mower, but it's a Cub Cadet and has the F N R on the left side and the speed control and blade engage levers on the right side... Why does the red reverse light want to come on while starting it ...

Hey all I am looking for a starter pulley for a 2150 Poulan Chain Saw.............. Let me know my friends ~!~!

This video was made not far from my house and has a lot of my buddies in it........ Ayeeeeeeeeeeeeeee ~!~! Enjoy Mes Ami ~!~! https://youtu.be/shVL7vRqyyw

My buddy bought a tiller with a LCT engine on it.... He always used No Fart gas LOL in all his equipment.... He drinks WINE and A BEER, but no CORN liquor LOL......... That tiller is about 8 years old and this is the first time that the carb came off.... I worked on the tiller 4 yrs ago for the...

My buddy bought a tiller with a LCT engine on it.... He always used No Fart gas LOL in all his equipment.... He drinks WINE and A BEER, but no CORN liquor LOL......... That tiller is about 8 years old and this is the first time that the carb came off.... I worked on the tiller 4 yrs ago for...

I was at the so called Can Man today looking at a used dryer for a drum roller to fix my dryer... We have a very nice place in town to dry clothes, but I would rather do it at my house....... My buddy the Sheriff Johnny Best was with me and he noticed 2 saws in the aluminum bin... Yea go...

I was at the so called Can Man today looking at a used dryer for a drum roller to fix my dryer... We have a very nice place in town to dry clothes, but I would rather do it at my house....... My buddy the Sheriff Johnny Best was with me and he noticed 2 saws in the aluminum bin... Yea go...

Me and my buddy talking on the radio LIVE about non ethanol gas............ https://youtu.be/ZM5LLUvMbr0

Well one of my 4 engines I am getting ready to put on frames to get rid of is a NO GO as NASA would say. I had to ABORT the mission at the end of launch. Way at the end of Supper too if you get the drift............. I should have tagged this engine. It was one for a sump cover, to reuse for...

How do I change the time on here in my profile settings. I cannot find a place to click on. It might be that it is a default for U.K. time ??? I bet ya'll thought this was a timing issue on an engine. Nope I am to well aware of those issues many hundreds and hundreds of times in the past 37...

I have a Husky 359 that needs some parts that I want to trade for a Mity vac pressure tester..........

Hello all, A friend of mine owns a outboard engine shop and used to be a Mcculloch dealer years ago. I mentioned to him that I needed a tensioner bolt for my Ms 38. He said I have a box of new parts you can sift thru and see if you can find what you need. Wow when he brought that 2 ft. X 3...

Hello all I stumbled on this site while searching for a certain part online. I have a small engine repair shop in South Louisiana hence the name and the town and state I live in on my profile. I will post a avatar once I get used to this forum...