Search results

Results 1 to 10 of 10
  1. R

    Honda GCV 190 rings

    Thanks for the sealant info. Here's a picture of the cylinder: And here are my end gap measurements: Starting at the top and going down into cylinder 1- .015, .014, .013 2. .021,.022 oil ring in the middle of the cylinder- .014 I don't have a service manual so I don't know how those...
  2. R

    Honda GCV 190 rings

    Greetings fellow enthusiasts, I have a HRX 217 my neighbor gave me. He's cleaning out the shed. He tried starting it with me there by spraying starter fluid in the air cleaner side and it wouldn't stay running. I changed the gas in it and it ran for a little while but was blowing out blue...
  3. R

    Shredder

    Hi guys, my brother gave me his shredder model 47256. It has sat outside for so long the mice have made the engine a hotel.... it's shot. I'm trying to get the pulley off my the crankshaft and I'm not sure how it comes off. There are two bolts on the engine side I took out and it looks like...
  4. R

    Needle valve rubber seat. Which direction?

    Good morning! My rebuild kit 631893a has a rubber seat for the needle valve with a groove in one side. Does the grove go down toward the body of the jet or does it go up for the needle valve to seat against? Thanks R&R
  5. R

    Oil overfilled /drained refilled smoking white

    Another lawn mowing season has begun... last year my sister in law WAY overfilled her Toro GTS 21 inch rear bigger. Mod. 20622. As much oil as I drained I don't think it could have possibly started. I drained the oil last year and it has sat all winter. I put in approximately 21 ounces and...
  6. R

    Tires tire installation!

    Hi guys, I'm trying to get 4.10 tubeless tires to inflate on my snow blower. I had the same problem with my rider mower this summer. The smaller the tire the harder to "bead"? I've tried belts, rope, wraped around the tire, nothing seems to work. I finally gave up and had my neighbor take...
  7. R

    When do you know it's trashed?

    Good morning everybody, A friend of mine at work gave me a 305 cc 1350 series. It looks like it has hardly been run... to make a long story short, when I pulled the cover off, the connecting rod is in a hundred pieces. There was very little oil in it. The dip stick was melted to a piece of...
  8. R

    Snowking 8/27 rough running

    Hopefully this time it will work. Thanks for the help Rivets. I have a few new gaskets coming in the mail.
  9. R

    Snowking 8/27 rough running

    Good morning! My snow king has a HMSK 80 engine on it and it was running rough. It was not a smooth idle. The plug was getting black pretty quick. I bought it that way thinking I would just buy a new carburator, and the price was a real deal. New carb. and same thing. I'm now at the point...
  10. R

    Locked up engine!

    Greetings everyone! And thank you to our Military Veterans on Memorial Day. I pick up an old (1995) Snapper LT140H38ABV from a friend at work yesterday. Another friend had worked on it earlier this month and he "tuned" it up for her. He overfilled the oil. 56 oz. I know because I measured...
Top