Search results

Results 1 to 20 of 85
  1. 2ball

    Changed a belt, doesn't sound right now

    greasing all the Zerks seemed to get it to settle down. I guess I got the spindles to spin a little easier and lowered the inertia.
  2. 2ball

    grease

    John Deere Multi-Purpose HD Lithium Complex Grease Grease-Gard™ Premium Plus Is there anything special about this grease? Can I use any grease? I have marine grease, can I use that? and do I use one of the other or do they each have a different purpose?
  3. 2ball

    Changed a belt, doesn't sound right now

    Dropped the deck again today. double checked it was the right belt, hand spun all of the pulleys. watched videos. everything seems like it operates correctly. I did see a video of the one handed mower guy starting a similar one and his did give a good shake before the blades engaged. I'm...
  4. 2ball

    Changed a belt, doesn't sound right now

    I changed the broken belt on a JD X330. I don't think it matters, but the old blades were chipped, broken and they were dullest blades I have ever seen. (not my mower, helping a friend). The old blades and belt were original and lasted 3 years. In the past when the blades were engaged there...
  5. 2ball

    Why did this happen?

    Hard to tell on the video, but I am cutting on a slope so big that I tried to sit on the fender to keep from sliding off the seat. When I did that the seat safety started to shut the engine off, so I sat on the seat and the mower backfired. She is an oil burner, so before the cut I added oil...
  6. 2ball

    Why did this happen?

    I have turned my push mowers on their side to get oil out and this never happens. This mower was fine after.
  7. 2ball

    Cheap Chinses Carb

    So I bought a new needle and float and installed them. I have not tested them to see if they are functioning property. I did cut grass when the needle tip was broken off, so I assume the needle was not working at all at that time. The mower ran properly and I shut off the fuel as soon as I...
  8. 2ball

    Cheap Chinses Carb

    I don't have a pump like that, but I blew on it with my mouth and it seemed ok!
  9. 2ball

    Cheap Chinses Carb

    I've been using the fuel shut off every time I put it away. I would then run it out of gas. The next start up I would use starter fluid to start it so it didn't have to crank for 30 seconds before the fuel entered the mix. I got ambitious and thought I could fix the flooding issue for $20...
  10. 2ball

    Cheap Chinses Carb

    I took the carb off when I first got the engine. I cleaned it up best I could and mangled the main jet when I couldn't get it out.
  11. 2ball

    Cheap Chinses Carb

    My needle was bad, currently there is no tip on it. I ordered a new one. I hear the solenoid click. I put in a fuel shutoff and I have been using that for the past 2 seasons. I was hoping to not have to go through the process of shutting off the fuel, letting it run out of gas and having a...
  12. 2ball

    Cheap Chinses Carb

    Ok, so a new needle, I probably need a bowel gasket, a new float wouldn't hurt and I can probably skip the seat for now? What Bowl gasket do I need?
  13. 2ball

    Cheap Chinses Carb

    I took the bowl off and this is what I found. The needle tip was breaking off and before I put it back together it broke off. It looks exactly like the needle that was suggested right?
  14. 2ball

    Cheap Chinses Carb

    I think this is the answer. removing and replacing the seat seems do-able.
  15. 2ball

    Cheap Chinses Carb

    From Rotary: Good morning, I was able to look into your Model number 31C707-0154-E. I was able to find the OEM number off the carburetor you needed. However we did not cross it back to anything we will have here at Rotary at this time. I will list the OEM numbers I have found as I hope it will...
  16. 2ball

    Cheap Chinses Carb

    yea, you sold me on quality aftermarket, if I can find one!
  17. 2ball

    Cheap Chinses Carb

    thanks, I just emailed Stens with all of the information that I have. hope they reply in a day or two. I will keep looking online also.
  18. 2ball

    Cheap Chinses Carb

    Holy smokes this complicated. I'm not sure how to search to find a carb that fits. Walbro LMT carburetor brought no returns searching in those sights. I'm going to drink a couple beers and try again in a few.
  19. 2ball

    Cheap Chinses Carb

    Nice thanks for this info. I am having trouble figuring out what Carb I need. The carb was on the used engine when I bought the engine and its still on there. I have been told that it is a Walbro Carb based on the LTM 4993 stamped on it. I have found a LTM 5-4993 carb. I believe my engine...
  20. 2ball

    Cheap Chinses Carb

    I don't know, maybe someone before me bought a cheap Chinese Carb and has a story to go along with it, maybe it worked out good for them or bad for them. Or maybe someone who knows a lot about these engines will suggest I just rebuild the current carb and offer suggestions on exactly what I...
Top