Search results

Results 1 to 20 of 200
  1. M

    Zero Turn Mower Buying

    If the deck is not rattling with the blades engaged and wide open throttle, I wouldn’t be too concerned. With any mower you look at, make sure the engine sounds right at all engine speeds. Personally, I think that a 52” mower is a little large. A 42” to 48” deck would probably be all that you...
  2. M

    Zero Turn Mower Buying

    Before buying a 52” Gravely, have the dealer fire it up and engage the blades. Some of the 52” Gravelys have presented a bad deck vibration. This issue was supposed to be addressed by Ariens Co. Do the same test on the 48” and the 52” decks.
  3. M

    Dirty Hands Brush Mower

    It’s important that you get all of the spindle’s existing dimensions written down. Shaft length and diameter. Spindle outside diameter. Spindle length. Bolt hole size and pattern.
  4. M

    Dirty Hands Brush Mower

    Go to Rotary’s website and see if you can match something up, using the dimensions of your existing spindle. https://www.rotarycorp.com/search/?q=&l=15&p=1&s=&pr=,&f=subclass:10-007
  5. M

    Dirty Hands Brush Mower

    To get you close, you are going to have to get all of the dimensions of the existing spindle. Can it be rebuilt?
  6. M

    Zero Turn Mower Buying

    The dealer should always be considered when making a purchase. If your closest dealer also carries Ariens mowers, check out the Ariens Apex. The Apex and Gravely ZT HD are very similar. There are some subtle differences. The engine offerings with be slightly different.
  7. M

    Spam loaded.

    Here’s one that’s gotten through @consueloemard
  8. M

    Zero Turn Mower Buying

    Put your name on the list at your local dealers. Let them know what you are looking for. They can usually tell you if they have any scheduled to be delivered.
  9. M

    Spam loaded.

    Yes! Thanks go out to the administrators who cleaned this site up! Bravo!
  10. M

    Welcome to the Hustler Forum -- Check in Here First!

    Sounds like a safety switch. Check the seat switch first.
  11. M

    Raptor SD stalling when blades are engaged

    Engage the PTO at a higher throttle setting (3/4 to Full). The operators manual for my Kohler powered Gravely states to engage blades at full throttle. I like to set my deck at the my desired cutting height before engaging the blades. I had a Toro that would sometimes throw the belt if the...
  12. M

    How do i replace aCraftsman blade holder ..

    I’m worried that he boogered up the crankshaft.
  13. M

    How do i replace aCraftsman blade holder ..

    The way that you described the after effects, you are likely to have a bent crankshaft. If the crankshaft is bent, be ready to fork out money for a new engine or new mower. Anyway, here’s a video.
  14. M

    Looking for a 30" hydrostatic zero turn mower

    You might find a used one. Other than that, your choices are 30” commercial walk behind mowers.
  15. M

    Spam loaded.

    Thanks. I’m beginning to believe it’s a DDOS attack.
  16. M

    Spam loaded.

    I totally agree. I’ve never seen anything like it on any other forum. I’m beginning to think that this site’s servers has been infected with some sort of malware.
  17. M

    Spam loaded.

    It might be wise for the administrators to run a security check on the site’s server. Malware?
  18. M

    The spammers are back

    The spammers are back
  19. M

    Spam loaded.

    THEY’RE BACK!
  20. M

    How do i replace aCraftsman blade holder ..

    You need to get the blade and blade holder off of the crankshaft. After doing that, try to crank the mower. If the mower cranks and runs smooth, you can proceed. If the mower vibrates like crazy, you have bigger problems.
Top