Friend sent me this link:
Just when ya thought your mower was expensive, check this rig... 96" wide cut. Wings fold up for transport /cleaning & or servicing.
7500-D Series 96" (244 cm) 37 HP 1642cc Diesel Rear Discharge (72096)...
This is a 1st for me. Just got my order in, & the Spark Plugs are made in Japan, but assembled in Thailand..
Boxes look slightly different, but same everything else.
I tested the Ohm resistance on these & they are between 4K - 6k Ohm. Which is fine.
They are resistor spark plugs.
Can't believe all the New no-frills "human powered" push mowers only cut to 3." or max @ 3.75"
When I find one that cuts @ 4 inch, it is self propelled.. Arrrgh.. And Side Discharge would be another "want".
Thanks in advance.
My vintage B&S Flathead push mower is getting low on compression. Since it does not burn oil & plug is clean, I suspect the valves, in particular the Exhaust.
There is no valve lash adjustment in the conventional sense on this Flathead. Mow season is possibly close to over, So when done, I'll...
Yesterday while mowing down in back, I accidentally found the kids lost baseball. What a loud sound my mower made, it cut it in two.
I checked everything on my Z & blades & belt etc are still running true. & I finished mowing the rest of my grass. Not happy about finding that in my fenced...
My 14 year old MTD /Briggs Flathead is still doing good. Friend hit a rock w/it 2 yrs ago, I got the crank as straight as I could. It runs good, but can tell it is getting tired.
So thinking about an upgrade to a NEW Hi-wheel Troy-Bilt deck with Honda 160cc engine.
This would be from Big box...
Brand New in box (oem) 1 -1/2 gallon gas tank & cap, for the 917 Craftsman Riding Mowers & also Husqvarna/ AYP/EHP/SEARS/ROPER & Possibly others. OEM-ORIGINAL Equipment Manufactured.
Part # 581289901 (old part # was 407545)
I no longer have this mower, so tank must go. Gas Tank with...
Ace used to carry the Dixie Chopper line, but since DC was bought up & liquidated, Ace has brought in Exmark.
I was getting my Kawasaki oil filters from Ace when they had big sales.. So maybe I still can..
To the day it has been 5 years since I bought my Toro Z. I don't wanna jinx it, but I don't have a single regret getting this machine.. This is time of year my Dealer has big sales to make room for next year models.. I saved about $400. on mine, back in 2014...
The Kawasaki FR(X)651V has...
Just got a kit for my String trimmer. (kit made in Taiwan) Upon inspection I find that:
The gas tank Vent Valve in the kit allows only very little draw, & if you add a lil pressure the rubber inside pops away from seated position, while the cap remains on.
Is my original one serviceable ...
Yesterday, had a computer issue that caused a loss of a lot of my passwords etc.
Since we (or at least I & some others I know) don't get emails to post replies, I could NOT re-set my Password.
I had to re-register under a different ID to send a PM to Muhammad. He understood everything &...