Search results

Results 1 to 20 of 200
  1. 7394

    New member saying thanks for allowing me to join this group.

    Cool, & Congrats on the new machine. Which engine does it have ?
  2. 7394

    Echo srm225 rattle

    Where is the rattle ? Up by the engine, or down at the spool head ? Call the Dealer & ask to speak to a tech. Tell him the deal. I'd be taking it in just to be sure.
  3. 7394

    Toro 7500-D Series 96" only $47,221.00

    Friend sent me this link: Just when ya thought your mower was expensive, check this rig... 96" wide cut. Wings fold up for transport /cleaning & or servicing. 7500-D Series 96" (244 cm) 37 HP 1642cc Diesel Rear Discharge (72096)...
  4. 7394

    Cub Cadet shuts off when you pull the handles in

    I was just gonna post to check seat sensor.. Doh..
  5. 7394

    New NGK Spark Plugs assembled in Thailand ?

    Thanks Mark- the "assembled in Thailand plugs, have the 1st letter on the hex stamping of the plug, & it will be a "U". These are the 1st I ever got from there, thus my initial concern. And in that 4 digit code tells they were assembled in 2020. So I can sleep again.. LOL
  6. 7394

    New NGK Spark Plugs assembled in Thailand ?

    OK, spoke to NGK tech dept. On the Hex of the NGK plugs is a stamping of letters & numbers. (usually only 4 in total) If the 1st letter is a "U" the plug is legit NGK, & assembled in Thailand. Most of those have a plastic cover over the tip, instead of the usual thin cardboard as well. But...
  7. 7394

    New NGK Spark Plugs assembled in Thailand ?

    Well I'll say this, no more plugs from anywhere else than O'Reillys. they are always from Japan, & only cost $2.49 ea. Not assembled in Thailand. These were for back up, the BPR4ES.......6578 for my Kawasaki. Guess I'm keeping them..
  8. 7394

    New NGK Spark Plugs assembled in Thailand ?

    Yea, seems to be mostly on the iridium plugs. But can't rule out the regular ones, like I use.
  9. 7394

    New NGK Spark Plugs assembled in Thailand ?

    Well china is neighbors to Thailand. But there is a big Fake NGK plugs thing going on.. Just a FYI.
  10. 7394

    New NGK Spark Plugs assembled in Thailand ?

    This is a 1st for me. Just got my order in, & the Spark Plugs are made in Japan, but assembled in Thailand.. Boxes look slightly different, but same everything else. I tested the Ohm resistance on these & they are between 4K - 6k Ohm. Which is fine. They are resistor spark plugs.
  11. 7394

    New member saying thanks for allowing me to join this group.

    Welcome & Congrats here as well.
  12. 7394

    Oil Overfill??

    On my drain pans, I have marks & amounts marked on them, so I measure how much I get outta my Z for example, No guess work.
  13. 7394

    Advice needed on buying a zero turn... Toro or Troy Bilt!

    Well my 15+ year old MTD (Made in USA B&S Flathead powered) push mower, hasn't skipped a beat in all those years. But I would not buy one today. And my Toro Timecutter has been great from day one back in 2014.
  14. 7394

    FR691V motot on a zero turn Cub cadet 50"

    Is the engine & cylinder fins free of debris under the blower housing ?
  15. 7394

    Exhaust glowing red - issues..

    Throw that E3 spark plug away & put in a matched pair of what it calls for.
  16. 7394

    Craftsman Gas Tank

    (y)
  17. 7394

    Exmark engine oil substitute

    Not till now, what weight are you using ? Which engine does yours have ?
  18. 7394

    Exhaust glowing red - issues..

    Leakdown test | Lawn Mower Forum or: how to do a LEAK DOWN test on a lawnmower - YouTube Also I would use a spray bottle of soapy water, run engine & spray around the carb to intake gasket. If it has an air leak, it will can cause very lean condition. You will know if there is a leak when...
  19. 7394

    Repair plastic shield? JB Plastic weld?

    (y) If you pop the rivets from the inside outward, there will be little of the head to snag grass etc..
Top