Search results

Results 1 to 20 of 52
  1. C

    belt size question

    ok final update the belt i just got 34.4" 90cm long by 1/2" wide works like a champ. i went out yearterday and blowed out the back drive section about as big as a 40 x 80 barn 12" deep compressed for a week and it blew the snow liek a champ. so for those looking for a belt the 1/2" x 35 1/4"...
  2. C

    belt size question

    ok update i got the belts it is working this one came from husqvarna at one time and i got it from ebay original part number on the cover is 581-832401 like the book says. so maybe when the part was picked the incorrect belts were in the wrong bins. even after 3 tries. anyway like i said if you...
  3. C

    belt size question

    if you just cut the belt it will still be the same length it it is worn that will not change the length if it is broke cut off the jagged [arts off and measure with a tape you can to the in a bathroom thanks
  4. C

    belt size question

    well i just do not know how to advise you on that. like i said i was a machine repairman for 40 years and i use the shop floor to measure long belts. and for long belts if i needed hep i found help to hold them. for long belts i would just lay them sideways and run them along the wall. but then...
  5. C

    belt size question

    i guess it depends on how you actually measure them. in my 40 years as a machine repairman and in on stint i worked in the shops apint line and i had to maintain maybe 4 sets of belted machines, all fans a few for the chain drive. and in my time on that job i measured then the same way i...
  6. C

    belt size question

    we will see tomorrow. if it turns out to be the wrong length i will stop back and let you all know. and then i will go the the auto parts store and get one. i could not before as i did not have the length. thanks bp
  7. C

    belt size question

    i know about how belts work this is from the husqvarna. some belts need to be cogged also to be able to take a sharper bend. and this is not a serpentine belt it only uses the back side for getting the tension for grabbing the drive sheave. belts have done that way before serpentine belts came...
  8. C

    belt size question

    may have been as these are not the same size belts the drive belts is 1/2 x 38.2" and the impeller belts it 1/2 x 34.4" just an fyi i have 3 of the 3501 belts and they fit the drive and are lose as a goose on th impeller see that photo i posted. i ordered on from poulan one form husqvarna...
  9. C

    belt size question

    ok i got the belt size it is a 1/2x35 1/4" belt for those that need to find one local in a hurry. i sent out a bunch of questions to online v-belt sites and most came back to me with that size. the husqvarna dealer told me they have an error and some place send out the same size as the drive...
  10. C

    belt size question

    ok but i'm saying they are 2 different sizes. i have 3 of the drive belts now and when i compare them the difference i like 2" when holding them in your hands and i tried using one on the impeller and it was loose as a goose. so if you ever had to do one and get that belt i'm betting your going...
  11. C

    belt size question

    the model is pr271 (96192007301) according to my owners manual t different size belt. like i said i got the 4L x 38.2 belt one time from the parts store, one time form lowes and one time from poulan website and they all are for the drive belt i tried the poulan one on the impeller and i...
  12. C

    belt size question

    i see tht but my belt is 35.2 i measured it. that number 581832401 is not correct for my machine i got 3 of that number and i tried them and they are as loose as a goose. 2 different belts 2 different numbers. the 4l x 38.2 belt is 584 83 2401 the one i need is 581 83 2401 thanks
  13. C

    belt size question

    thanks they are 2 different widths according to the poulan pro website. the drive belt is the 4L x 38.2 the impeller belt is 3/8" x 35.4 long and yes you can get kevlar belts at the auto parts store i have got lots of them over the years but they may not have the 35.2" belt but they do have...
  14. C

    belt size question

    i have the poulan pro snowblower model pr271 and the impeller belt finally gave up. the book calls it a 581 83 24-01 it turns out to be 35.4" long. so has anyone figured out the normal size of this belt so i may get on at the autoparts store or maybe lowes? the drive bel they crossed in the book...
  15. C

    toro 2 cycle snowblower ccr2000?

    ok i got the carb and will be installing it tomorrow. because the thing did run rather good last week but started hard i believe all that is wrong is the carb. tomorrow after i install it i think it should start up just fine. i will return here and give the final resolution on this project. the...
  16. C

    toro 2 cycle snowblower ccr2000?

    thanks when the parts get here it should be a easy repair. might be just in time for snow. thanks bp.
  17. C

    toro 2 cycle snowblower ccr2000?

    ok it does not have the kit it has the float. i found the model number finally and have a carb on order. thanks for the help and ideas. late getting back this was in the spam folder. i also did find a youtube that talked about these models and i had the same issue, now when the car gets here i...
  18. C

    toro 2 cycle snowblower ccr2000?

    i got this snowblower from the neighbor and he asked me to see if i can get it running. so this is what i found so far. i took the carb off and cleaned the bowl, and set the what may be the idle screw to from 3\1/2 turn all the way out to 3 turns and it will about start but not stay running...
  19. C

    how to flip over a boat

    i have a 14' boat on a trailer and i want to flip it over for the winter to keep the junk out of it. it is an aluminum boat and i do not have help to flip it, so i wonder if anyone here on the mower forums has ever built a device that can be mounted to this is the bow winch structure and let me...
  20. C

    dyt 4000

    never mind after posting i found some that will work. i tried universal tie rod ends search and found both the threaded and the banjo style so now to figure the ones that will work the best and go for them.
Top