Search results

Results 1 to 10 of 10
  1. C

    Briggs push mower engine 126T02-0675-B2

    Hello, I've got a briggs engine on a push mower that has me stumped. It wasn't running. First thing I found is the coil was spaced way too far from the flywheel. Reset the gap and the mower cranked up and ran good. Put the air filter base and filter on and it sounds like its flooding. Brand...
  2. C

    Adding a 1/4" hose nipple to a plastic dipstick tube

    Strange question, I know. But I have a new engine that came without the optional pulse fuel pump. It's a Loncin 17 hp, and I'm having a hard time sourcing the correct dipstick tube with the nipple made into it. (how the OEM Loncin motors come with the fuel pump) I could possibly drill a hole...
  3. C

    Kohler Command 25 misting oil through breather

    Hello everyone, Got a question I think I already know the answer to, but wanted a little verification. I've got a kohler command 25 vertical that is blowing a light mist of oil through the breather hose. Very light mist. Also has the hissing sound when you shut the engine off, the last few...
  4. C

    Encore zero turn mowers

    Hey guys, I own a small dealership for zero turn mowers, as well as blades, belts and other parts for many different mowers, and a repair shop. I was approached today by a salesman from Encore and he gave me a program and pricing on the mowers. The price looks good and so do the specs. I...
  5. C

    New Briggs Vanguard 40 hp EFI

    Hello, Curious about opinions on the new B&S Vanguard 40 HP EFI that's being put on commercial mowers. Vertical shaft I believe. I was always a fan of the older Vanguard engines. Someone said they used to be made by Datsun and were top of the line engines. Just wonder if it is still true about...
  6. C

    Kohler Command Single cylinder- leaking gas

    Hello, I have a kohler command single in the shop. I think around 17-18 HP. (model # is worn off) It has a mechanical fuel pump mounted to the side of the block, and has a problem with leaking gas into the cylinder. Weve tried two different carburetors. Rebuilt with new needle valve and...
  7. C

    Exmark Turf Tracer wiring diagram/switch doesn't turn off motor

    Hello everyone, I have an Exmark Turf Tracer TTX691KAE (312603620) in the shop that was having some wiring problems. The connector going to the motor was dry rotted, and being this guy is a full blown commercial customer, we decided to replace the wiring harness. It has seen lots of use and...
  8. C

    getting signal to new solenoid, still won't engage starter

    Hello everyone, Long time small engine mechanic, having a hair pulling issue with a lawn mower in the shop. It's a dixie chopper silver eagle with a 27 HP kawasaki engine. I'm getting a signal to the starter when I turn the key, but all it does is "click" "click". OK, simple, its the starter...
  9. C

    difference in raw edge and covered belts?

    Hello, I've been wondering for awhile now what is the difference in raw edge and covered belts? Of course I know the obvious, that one is covered in some sort of clothlike material and the other is not. But what are the differences in performance, longevity, etc. I just don't understand why some...
  10. C

    Kohler Command CV730 low on power

    Hello all, I have a 25 HP Kohler Command CV730 in the shop. I've been through the carb, replaced fuel lines and filter, fuel pump, spark plugs, tested compression (135 on each cylinder) Set RPM's at 3400. It cranks and runs really good until you put a load on the motor. Then it is very weak...
Top