Search:

Type: Posts; User: bertsmobile1

Page 1 of 10 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    1
    Views
    57

    Re: exmark lazer z igintion

    Usually yes.
    Get your magnifier out and have a good look at the back of the switch.
    The terminals are usually identified with letters
    G=Ground
    B=battery
    M= Magneto kill wire
    S=Start
    L= Lights...
  2. Re: Scag Wildcat 2007 no juice to starter

    First thing can you turn the engine over by hand ?
    If not remove the spark plugs & try again
    Do not crank.
    If the engine has hydro locked, the starter is not strong enough to compress the petrol...
  3. Re: Toro Z Master 453 48" model 74417 starter-relay wiring question

    Ultimately every one on the planet is related if you go back far enough.
    Regardless of weather you believe we are all the sons & daughters of Adam & Eve or we all evolved out of Africa or...
  4. Re: John Deere RX75 Parking brake lever missing springs

    Won't be much help for the OP but will be of great assistance to future readers looking for the solution to the same problem .
    So a big thank you for taking the time & making the effort.
    That is...
  5. Replies
    1
    Views
    53

    Mower deck Re: 917.259572

    First place to look is the sears web page and download the owners manual for this mower.
    It has a separate height adjustment and blade engagement controls.
    The height adjuster limits the movement...
  6. Re: Toro Z Master 453 48" model 74417 starter-relay wiring question

    No need to connect the wires once you have clipped the plunger off.
    Just remember that green (?) wire will be +12 V every second that the key is on so tape it up out of the way.

    The starting...
  7. Re: PYT-9000 with 26hp B&S professional series

    If working properly no
    In reality most will turn with a little difficulty and you will hear the brake dragging
    Makes it a bitch to diagnose a buggered bearing and they are not the sort of item you...
  8. Replies
    2
    Views
    91

    Re: Deck not straight

    Straitness of the deck has nothing to do with where anything is except the cutting tips of the blades.
    Measure them to the ground, the bodywork means nothing
  9. Replies
    2
    Views
    135

    Re: Kohler pro hp will not start

    Straitness of the deck has nothing to do with where anything is except the cutting tips of the blades.
    Measure them to the ground, the bodywork means nothing
  10. Re: New Chinese engine spotted on budget craftsman mower at Sears

    ASAIK they are the Liffan engines .
    Liffan is a big engine maker but usually for small motorcycles that you will not see in the USA cause they are not EPA compliant.
    They started selling engines (...
  11. Re: Toro Z Master 453 48" model 74417 starter-relay wiring question

    They are not manditory down here yet.
    We go to tier II on July 1 2020 and they are tier III
    So yes you can just cut the plunger off and the solenoid is defeated.
    OR just replace it with a bolt...
  12. Re: John Deere LA 115. Running like I have a Governor Issue - Surging

    If you have the Nikki carb with the white plastic dodad between the float bowl & carb body, then the trick is to fit the rubber seal, fit the plastic bit into the body then put the bowl on.
    And yes...
  13. Re: PYT-9000 with 26hp B&S professional series

    There are two different versions of PTO clutches.
    One free wheels when the PTO is off & gets used on decks that have blade brakes fitted
    The other locks when the PTO is off to act as a blade brake...
  14. Re: PYT-9000 with 26hp B&S professional series

    Not sure of the exact deck but make sure the belt is around the pulley and under the brake pads and keepers.
    Very easy & common to miss one and have the belt running over rather than under.
    This...
  15. Re: Toro Z Master 453 48" model 74417 starter-relay wiring question

    I assume you are talking about the fuel shut off solenoid on the bottom/ side of the carby.
    They come in 2 types
    Electrically insulated requiring both a power & ground wire
    and
    Grounded by the...
  16. Replies
    2
    Views
    124

    Re: Auto safety blade shut off

    I never tell anyone or even advise anyone to defeat a safety switch no matter how stupid & useless it is like the MIR system.
    I will tell you how it works. what you choose to do then is your...
  17. Replies
    6
    Views
    144

    Re: which is the right belt?

    If something seems too cheap to be true,, then it is.
    Check the add & you will see the word "unbranded"
    Unbranded = so bad the original ordering company would not alloy their name to be printed on...
  18. Replies
    7
    Views
    137

    Re: Deck lift issue

    I can see what you are thinking but you are wrong.
    Your mower was not accidentially fitted with 38" deck lifting arms.
    The arms are the same on all of the mowers regardless of the deck size.
    The...
  19. Replies
    7
    Views
    137

    Re: Deck lift issue

    Kevlar belts do not stretch.
    They wear on the contact faces so get thinner sit deeper & become loose.
    Mower companies and in particular MTD us non standard belts like 21/32" wide, not std 5/8"...
  20. Replies
    7
    Views
    229

    Re: Bearing life

    Deep groove ball bearings are not a particularly a good choice for spindle bearings from an engineering point of view.
    Tapered rollers are far better and they had been used on top line commercial...
  21. Re: Kohler Aftermarket starter replacements

    Shame you closed your mind to what we were trying to tell you.
    That shows a lot of your character.
    A person's perception of a problem will depend upon how it is affecting them.
    You like to think...
  22. Replies
    7
    Views
    193

    Re: kawasaki kf82dx stator

    And what is KF 82DX , the engine model number because Kawasaki do not recognise it.

    If this is a magneto engine then pull the kill wire from the magneto and see if you have spark when cranking.
  23. Replies
    2
    Views
    109

    Re: PTO, acceptable rpm drop.

    One at time pull the spark plug leads off & try to ground them

    What you are describing is exactly what happens when one cylinder on a V twin is not working
  24. Replies
    7
    Views
    252

    Re: Mower Only moves in reverse

    Not trying to be critical or abusive on a personnal level.
    My father bought his first walk behind mower in 1962.
    It cost 49 gineas , which was not important. What is that the 49 (call them what you...
  25. Replies
    7
    Views
    252

    Re: Mower Only moves in reverse

    The problem with that tranny is people do not come to a full stop before changing gear.
    What is missing is a warning decal on the dash.

    As for being a bad design, well yes.
    Why ?
    Because people...
  26. Thread: Hello

    by bertsmobile1
    Replies
    13
    Views
    515

    Re: Hello

    More important is you came back with the final solution.
    For which you are to be thanked.
    Describing a problem in words is never easy particularly when you do not have the trade jargon at hand....
  27. Re: PYT-9000 with 26hp B&S professional series

    Try it again when the clutch is cold.
    If it works fine when cold check the clutch air gap.
    If it is worn & the gap is too big it draws too much power which can cause the fuse to blow after a while.
  28. Re: Kohler Aftermarket starter replacements

    I can but only agree with Rivets.
    I am an independent technician so I get a lot of cranky owners who bought their equipment from a big discount store then expected the franchise service agent to...
  29. Re: hustler Fastrack hydro gear transmission issue

    So would I but the deepest he would allow me into his workshop was the cleaning & prep room .
    All I could see there was 4 parts washers that I could just about take a shower in.
    A vapour blasting...
  30. Re: Broken blade screw inside in crank-shaft

    It will depend upon what tools you have on hand.
    Starting with the easiest, after checking that the shaft is not bent as previously mentioned.
    1) get a center punch and tap the bolt at the edge at...
  31. Replies
    23
    Views
    431

    Re: Electrical Demons in my STT61A-27KA

    Well therre has to be some where for the cooling air to exit the engine.
    Unless that has a very fine screen on it there is space for mice, lizards or other critters to get in there.
  32. Re: PYT-9000 with 26hp B&S professional series

    Well the electricity to power that relay has to come from somewhere.
    So there has to be a + wire feeding into the loom and that wire has a fuse on it otherwise if you get a short the mower burns....
  33. Replies
    23
    Views
    431

    Re: Electrical Demons in my STT61A-27KA

    There is one, told you how to find it on your other thread.
    If this mower has been sitting all winter it is advisable to pull the blower housing & check for mice nests.
    They have a habbit of making...
  34. Re: PYT-9000 with 26hp B&S professional series

    your fuse is blown
    Find the starting solenoid.
    On the battery cable side will e a single small wire .
    That wire goes to the BATTERY terminal on the ignition switch , funny enough marked with the...
  35. Replies
    9
    Views
    207

    Re: NGK Spark Plugs. Recent quality

    There is no profit in making standard spark plugs and this is reflected in the quality of standard plugs.
    Modern fuels can be conducting at cylinder pressures .
    NGK does not put a white ( contains...
  36. Replies
    4
    Views
    117

    Re: TS348XD Review

    In this case it is just not enough weight on the front wheels or too much pressure in the front tyres.
  37. Re: Mower Blows 20 amp fuse when PTO when PTO is engaged

    I can be just as wrong as the next person so never worry about correcting me it is always appreciated.
    History ( well western history to be precise ) only records a single person who was never wrong...
  38. Re: Best oil/viscosity for 24 hp Husqvarna? Change once yearly?

    Best to change the oil at the end of each season.
    Viscosity will depend upon the ambient temperature of where you live.

    Best time to service you engine full stop is at the end of each season....
  39. Re: Kohler Aftermarket starter replacements

    Nothing wrong with the Kohler warranty.
    It broke & they will replace it, what more do you want ?
    As for cheap starters .
    I buy mine from Prime Line through a wholesaler and they cost near triple...
  40. Re: hustler Fastrack hydro gear transmission issue

    The problem is the whole process should be done in a dust free enviroment,
    If you look at the parts break down you will see a round valve chest with the pistons ( or balls ) in it.
    This rotates...
  41. Re: Briggs & Stratton model# 331877 issue with oil filter

    The hole is steel and should thread out,( Gees my English teacher would have liked that sentence ).
    IT will be difficult to grab but there should be a very thin hex at its base if it is removable....
  42. Re: briggs 104M020008F1 shutting down after 5min

    Get an Oregon red spark tester, they are the only ones you can see in the daylight.
    I do try to warn people that those too cheap to be true carbs everywhere on the net are mostly defective but...
  43. Re: hustler Fastrack hydro gear transmission issue

    That's interesting.
    We never had any till a year or so ago then we ended up with 2.
    One only works for dealers, the other takes jobs from the public.
    One machines the worn valve chests & base...
  44. Re: Brand new Troy Bilt riding mower too fast, how can I slow it down.

    Cray.
    the speed of the mower is regulated by the tension on the front drive belt
    This tension is applied by the clutch / brake pedal.
    Push it in and set the speed to 7 then let it out , note who...
  45. Re: hustler Fastrack hydro gear transmission issue

    loosing drive when hot is the first sign of a worn out tranny.
    Most can be rebuilt for about 1/2 the cost of replacement.
    Sometimes you can squeeze a few more seasons by replacing the oil with some...
  46. Re: Mower Blows 20 amp fuse when PTO when PTO is engaged

    There are 2 ways to approach a problem.
    Toss parts at it till it goes away or find where the actual problem is and rectify it.

    A solenoid draws POWER ( Watts ) and it does not care how it gets...
  47. Replies
    4
    Views
    193

    Re: PB 2400 Blower Start

    The first sign of a leaking crankshaft seal is being a bitch to start when cold , and the seals are dry, then being easy to start when the engine is hot & seals are wet so making a better seal.

    As...
  48. Replies
    4
    Views
    79

    Re: transmission pulley question

    A little movement is good as it allows for belt flopping.
    A lot is bad and can be taken up with some washers or other spacers.
    Most of them are quite loose say about .010" or so.
  49. Re: Toro proline 32inch walk behind repair question

    Pull the blower housing off.
    IF both go to the alternator then it is a second power wire, probably AC for lights as already mentioned.
    Looks like a swapped engine from a rider.
  50. View Post

    As Cpurvis already posted, start with a new plug.
    Not familiar with this particular hoe but if it has a regular carb, pull the float bowl clean it out .
    The trick that usually works is to use...
Results 1 to 50 of 500
Page 1 of 10 1 2 3 4