Recent content by hlw49

Oregon Round Gator line with aramid core. Not suppose to use cable or wire any more it can break and stick in your leg or put your eye out.

Does it have a mow in reverse position on the switch try running it in this mode if it does.

STATIC GOVERNOR ADJUSTMENT 1. With governor lever nut loose, push governor lever counter-clockwise as far as it will go (wide open throttle) and hold in this position. 2. Rotate governor shaft counter-clockwise as far it will go, Fig. 25. Torque governor nut to 100 in. lbs. (11.0 Nm). A 7/16”...

Does Snapper make their RER mower anymore. It is bullet proof. Forest Gump mower LOL I still have one but don't use it. I had one that was over 30 years old when I sold it. Had a guy come in one time and wanted a Forest Gump mower I had one and fixed him right up. Never have seen it back.

130 inch lbs on clamping bolt

pull the kill wire off and check for spark if no spark you might take the coil off and clean the mounting areas and recheck for spark. if still have no spark replace the ign module.

I assume you already have the engine or are you going to have to buy it. They make an FX730 engine with a one inch shaft. The shaft has to be the right length as well.

I think I would see if the piston is moving up and down

Did you by chance jump the seat switch? If so it will activate the fuel shut off solenoid and kill the battery in that length of time.