corvairbob's latest activity

ok final update the belt i just got 34.4" 90cm long by 1/2" wide works like a champ. i went out yearterday and blowed out the back...

ok update i got the belts it is working this one came from husqvarna at one time and i got it from ebay original part number on the...

if you just cut the belt it will still be the same length it it is worn that will not change the length if it is broke cut off the...

well i just do not know how to advise you on that. like i said i was a machine repairman for 40 years and i use the shop floor to...

i guess it depends on how you actually measure them. in my 40 years as a machine repairman and in on stint i worked in the shops apint...

we will see tomorrow. if it turns out to be the wrong length i will stop back and let you all know. and then i will go the the auto...

i know about how belts work this is from the husqvarna. some belts need to be cogged also to be able to take a sharper bend. and this...

may have been as these are not the same size belts the drive belts is 1/2 x 38.2" and the impeller belts it 1/2 x 34.4" just an fyi i...

ok i got the belt size it is a 1/2x35 1/4" belt for those that need to find one local in a hurry. i sent out a bunch of questions to...

ok but i'm saying they are 2 different sizes. i have 3 of the drive belts now and when i compare them the difference i like 2" when...

the model is pr271 (96192007301) according to my owners manual t different size belt. like i said i got the 4L x 38.2 belt one time...

i see tht but my belt is 35.2 i measured it. that number 581832401 is not correct for my machine i got 3 of that number and i tried them...

thanks they are 2 different widths according to the poulan pro website. the drive belt is the 4L x 38.2 the impeller belt is 3/8" x...

i have the poulan pro snowblower model pr271 and the impeller belt finally gave up. the book calls it a 581 83 24-01 it turns out to be...

ok i got the carb and will be installing it tomorrow. because the thing did run rather good last week but started hard i believe all...