Export thread

Hello everyone. I made have made a big mistake buying a used IS4000Z with a Kawasaki FD750D engine with a 61" deck off of eBay.
I knew it needed work done but didn't know that the wiring harness had been reconstructed. Someone put a second selonoid on it, when the starter comes with its own selonoid. It want start with the key being turned but it will turn over when you touch the contacts on the starter.
It will run briefly when I spray some starter fluid in carburetor. I'm thinking it may need a complete new wiring harness do the fact that the oil, temperature Gauges don't work either.
Does anyone know where to buy a complete harness for this mower?
I wonder if it's worth it?

LOOKS like the harness is about $181.00 + see enclosed links for parts places

http://www.ferrismowers.co.uk/wp-content/uploads/2016/02/Ferris-IS4000Z-Parts-Manual.pdf

http://www.messicks.com/fe/3284?sectionId=5044&diagramId=56537



I used P/N 5045807 ( depends on engine model) but most harness' are pretty much the same for the same BRAND eng. and accessories or use the diagram and re-wire it .

Thanks for information. What was the website name to buy the harness?

Ferris505 said:

Thanks for information. What was the website name to buy the harness?

Click to expand...

IT's right in my previous post...... Loisville tractor and Messicks READ the post ! click on items in the post !