Export thread

There, I fixed my deck!

#1

Tomster

Tomster

Lots of South Texas sand equals a deck with holes after 400 hours!
Here is the before:
IMG _2919 before.jpg
and after:
IMG_2933 after.jpg
Lots of rivets and sheet metal and I have a Frankenstein deck! Hopefully I can get another year or two out of the deck now.


#2

Ron3

Ron3

Tomster said:
Lots of South Texas sand equals a deck with holes after 400 hours!
Here is the before:
View attachment 58803
and after:
View attachment 58804
Lots of rivets and sheet metal and I have a Frankenstein deck! Hopefully I can get another year or two out of the deck no
Tomster said:
Lots of South Texas sand equals a deck with holes after 400 hours!
Here is the before:
View attachment 58803
and after:
View attachment 58804
Lots of rivets and sheet metal and I have a Frankenstein deck! Hopefully I can get another year or two out of the deck now.
Click to expand...
Hope it works out for you. I would be concerned about grass clogging and proper exhausting out the exhaust shoot also if sheet medal interferes with blades might be quite an event. Good luck.
Click to expand...


#3

Tomster

Tomster

Yes, good things to think about. My deck already clogged easily anyways so I'm already used to it. Also, there is quite a large gap between the sheet metal and the blades so adding .0299 plus a rivet head will be plenty of room.


#4

Ron3

Ron3

Good luck hope it works out well for you !


Footer Links 1

Top