Export thread
PTO Switch Confusion
#2
StarTech
StarTech
According to the IPL your switch terminal config should look like this.
The old switch you have probably looks like this one.
They can be interchange as long as you don't need the extra terminal in the second row. Most manufacture usually have the connector housing keyed on the lower row as to sure you install the connector correctly.
As long the replacement worked fine then replace with Stens 430-180 Yellow Tear Drop knob or Stens 430-396 Black Tear Drop knob. But there is a couple knob shapes out there that will work too.
Electrically the pin version works as follows. It just the 7 pin is not operating a terminal as in the connector the position is probably not having a wired connection.
The old switch you have probably looks like this one.
They can be interchange as long as you don't need the extra terminal in the second row. Most manufacture usually have the connector housing keyed on the lower row as to sure you install the connector correctly.
As long the replacement worked fine then replace with Stens 430-180 Yellow Tear Drop knob or Stens 430-396 Black Tear Drop knob. But there is a couple knob shapes out there that will work too.
Electrically the pin version works as follows. It just the 7 pin is not operating a terminal as in the connector the position is probably not having a wired connection.