lawn boy 8241AE electric start

[jonf6]

8241AE electric start QUESTION
would like to know if i can put a pull start cup on this machine
this model come just with electric start No puller
if so does anyone know the part number for this part ??
lawn boy 8241AE

 

[lewb]

If there are provisions for a pull start you may be able to do it. Got to think that it would be cost effective to use the same mold instead of using a mold for one model. You will probably have to tap the holes if they are there. If this is the case I think it can be done. Parts tree do list the parts, but you could buy a donor mower for much less when you add up all the parts needed.

https://www.partstree.com/parts/law...c00000001-c99999999/engine-group-models-8241/


If you want to just throw another f-motor on your deck there is a guy from out east that bought several f motors rebuilt that have tank, carb where all you would have to do is mount to deck and run some cables. His wife has a youtube account named "cat Lady".

Good luck.

 

[bertsmobile1]

Dual start or pull start only engines have longer crankshafts for the starter mechanism to engage with.
Asimilar question was asked a few days ago and some one came in with part numbers.