Export thread

JD L140 wont start

#1

J

JustinTractor

Just brought it back from the dealership on a non-engine related issue. Ran fine onto the flatbed and home. Drove it off the trailer and set the idle/ brake on it to move something in the way to park it and it quit. Engine turns over. I put fuel in the carb under the air filter and the engine started then stopped after a few seconds. Theres fuel in the filter. What are the next steps you good people would take?


#2

K

KennyV

Welcome to LMF from another Kansan, what part are you in?....

Is there a wire at the base of the carb??? check if it is unplugged...
or if there is a fuel shut off, that was not turned on... :smile:KennyV


#3

J

JustinTractor

Thanks, where would I check for the fuel shutoff?


#4

K

KennyV

At the tank or in the fuel line... It may or may not have one... :smile:KennyV


#5

J

JustinTractor

I'll follow the line, hey thanks KennyV!


#6

J

JustinTractor

If those are looking good what would anyone request to do next?


#7

K

KennyV

...
I put fuel in the carb under the air filter and the engine started then stopped after a few seconds. ...

Since it will start & run when you put fuel directly into the carb..
It has to be a fuel delivery problem... The fuel shut off valve under the carb bowl OR the float inside the bowl...
:smile:KennyV


#8

J

JustinTractor

That would make sense. How can I check the bowl? Sorry for sounding so stupid.


#9

RobertBrown

RobertBrown

The fuel shit off valve under the carb :smile:KennyV
I can't beleive you said that....KennyV:ashamed:
That's worse than looking for farts in Houston


#10

J

JustinTractor

lol, new terms are created everyday!


#11

J

JustinTractor

Had a similar experience at shit turnover Friday


#12

K

KennyV

I can't beleive you said that....KennyV:ashamed:
That's worse than looking for farts in Houston

OoooHHH.....
The I and the U keys are too close together... Oops.... :ashamed:KennyV:smile:


#13

K

KennyV

With that error I can see it is time for me to go back outside and burn a little diesel, it is now warm enough to get back to mowing...
Later everyone.. :smile:KennyV


#14

RobertBrown

RobertBrown

OoooHHH.....
The I and the U keys are too close together... Oops.... :ashamed:KennyV:smile:
We know what you meant:laughing:


#15

K

KennyV

We know what you meant:laughing:

Ouch again... while mowing I remembered I could edit it...
Did that... now if you will edit the quote... we may retain our 'R' rating on the forum.... :smile:KennyV

Now back to mowing...:smile::smile::smile:


#16

Briana

Briana

Hey there - WELCOME to LMF! :smile:

I moved your thread to the John Deere Forum. You'll get a better response there. :thumbsup:


Top