While that link was amusing,(I'm not sure if you think I'm an idiot or just vocally inarticulate) Let me try to explain the problem again. When the engine is running at idle or low speed, (i.e. not wide open) there is a "howling" noise coming from the drive shaft that connects the engine to the T Box (transmission) My question is, is there a procedure for setting the flexible couplers (fiberglass discs) ? The only thing I can think to do is loosen the engine mounting bolts and move the engine to a different position, but if there is a better way, I would appreciate the input. Thank You! By the way, the noise was not present until I hooked the transmission drive shaft to the engine.