The transaxle is getting harder and harder to shift, I could find no where to add grease. Does any one have any suggestions. This is my first post and thanks for any replies
The unit is basically unserviceable other than disassembly and clean out and put in new grease. You could try putting some light oil around the shift shaft at the input and see if it loosens up.
The unit is basically unserviceable other than disassembly and clean out and put in new grease. You could try putting some light oil around the shift shaft at the input and see if it loosens up.
Well poop, thats not what I wanted to hear. I guess there's no service manual then. I will try the oil and see how that works. As long as i can get through till late fall then I just might give a go at servicing it myself. Anyway, thanks for your input.
