I see a lot of links for information on the plastic steering bushing/coupler at the end of the steering column where it meets the steering box. What I can’t seem to find is the bushing that’s on the other side of the gear. It’s between the gear and the steering arm and passes through the steering box mounting bracket. It’s about 1 1/2 inches long and has a flat spot on top that matches a flat spot on the bracket. It has a 3/4 inch bore. It slides over the bolt that holds it all together. Mine has cracked right in half where it passes through the bracket.
The LT1000 was both made Husqvarna and MTD so the model number is important from the serial number tag. But I am getting blue in the face having to constantly ask for equipment model numbers.
The LT1000 was both made Husqvarna and MTD so the model number is important from the serial number tag. But I am getting blue in the face having to constantly ask for equipment model numbers.