Export thread

CMM1200 stalls under light load

#1

B

Billdherup

I just bought a used CMM1200. The seller warned me that it works perfectly but stalls without being overheated.
This was an honest assessment.

It stalls after maybe 5 minutes of use, then stalls more frequently after that.
After waiting about 30 seconds each time, it starts right up again, but then stalls.

I am thinking there must be a sensor somewhere that is bad.

Any suggestions?


#2

C

CWODonato

Billdherup said:
I just bought a used CMM1200. The seller warned me that it works perfectly but stalls without being overheated.
This was an honest assessment.

It stalls after maybe 5 minutes of use, then stalls more frequently after that.
After waiting about 30 seconds each time, it starts right up again, but then stalls.

I am thinking there must be a sensor somewhere that is bad.

Any suggestions?
Click to expand...

I have this same issue, have you figured it out yet? I'm thinking it might be the circuit breaker.


#3

B

Billdherup

I did find out that it was the circuit breaker.
They cost about $18
I removed the old one and bypassed it.
The thing worked perfectly without it.
Bill


#4

T

Titera

By passing the circuit breaker resolved the issue. Thanks, Bill!

I also went ahead and ordered a new circuit breaker for $22 (includes shipping): Stanley Black & Decker CIRCUIT BREAKER 90541220 - $16.94 | 1800ToolRepair.com


Footer Links 1

Top