Was wondering if anyone could help me out with a repair manual for the Briggs I/C 17.5 hp Model 31c707 0603 ?
I am going to replace the headgasket and carb but dont know if there is a pattern and how much to Torque, also if I will need to replace the headbolts ?
Thanks,
Chris
Thanks!
Im not sure this covers my motor as idk if it is a twin cylinder but Ive yet to remove the head. But from my guess its only a single piston motor, only one spark plug ?
#4
Scrubcadet10
Oh crap, that is the wrong model, when you said IC i assumed the opposed I/C twin. but they had a model number of 42 or 44, not 31. let me get you the correct one.
#5
Scrubcadet10
#6
Scrubcadet10
Torque
#7
StarTech
Head screws (bolts) are torque to 250 in-lbs or approxiamtely 21 ft-lbs (20.83333 ft-lbs) but make the head surface is flat as they can be warped.