I have a mower as stated above, Model 9D902 Type 2005B2 Code 0111155
I need guidance in setting up the carb linkages/springs. When running the motor idles good, at high idle the rpm increases but I can hear a soft backfire. I removed the air cleaner and when I move the throttle lever clockwise I get a better rpm.
This makes me think I connected the linkages incorrectly. This motor is off a lawn mower (yes I changed the flywheel) and does the job good. A good picture reply is appreciated.
Thank,
Dave
Attachments
#2
Parkmower
Not sure what your asking. I have a 3.5 classic that I'll take some pics if you need.
Hi again,
I found a diagram for my carb (#52) in attachment. I also found out where the extra spring goes...
My next question is: when running the motor I hear a very faint or soft backfire/missing. Any suggestions on how to eliminate this?
Hi again,
I found a diagram for my carb (#52) in attachment. I also found out where the extra spring goes...
My next question is: when running the motor I hear a very faint or soft backfire/missing. Any suggestions on how to eliminate this?
What exhaust is fitted to it as I cant see on the pictures.
If its a round one and it sounds like a "putt" noise now and again then its the just the normal sound of the engine.
They changed the exhaust to a rectangle low tone exhaust to try and sort this noise.