Advice on replacing the deck bearings on my ol' 111

[svejkovat]

Two deck bearings that are like this....

http://img.auctiva.com/imgdata/6/7/3/1/6/8/webimg/783316177_tp.jpg

and the (three ?) bearings that are in the two other pulleys al la..

http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/~G8AAOSwl8NVf5QF/$_35.JPG

I'm not sure of the provenance of this mower. Friend just gave it to me. It's old and worn, but will handle another decade the way I like to take care of machinery. As necessary I can provide numbers or more photos.

Can anyone save me some foot work on whether and/or how to replace these bearings? Are the spindle bearings pressed in or must the entire hub be purchased? Is there a source of bearing sizes/type for full replacement of these deck parts?

Thanks so much. As far as removal, installation, pressing, etc, I'm confident with that part. I'm only looking for some heads up parts and sourcing advice from anyone who's "been there".

Thanks so much.

 

[shiftsuper175607]

Two deck bearings that are like this....

http://img.auctiva.com/imgdata/6/7/3/1/6/8/webimg/783316177_tp.jpg

and the (three ?) bearings that are in the two other pulleys al la..

http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/~G8AAOSwl8NVf5QF/$_35.JPG

I'm not sure of the provenance of this mower. Friend just gave it to me. It's old and worn, but will handle another decade the way I like to take care of machinery. As necessary I can provide numbers or more photos.

Can anyone save me some foot work on whether and/or how to replace these bearings? Are the spindle bearings pressed in or must the entire hub be purchased? Is there a source of bearing sizes/type for full replacement of these deck parts?

Thanks so much. As far as removal, installation, pressing, etc, I'm confident with that part. I'm only looking for some heads up parts and sourcing advice from anyone who's "been there".

Thanks so much.

I saw a Youtube video a few days ago...I think it was by a donyboy##

Just do a search and you will find some short videos there.

Ebay has sellers of the whole spindles and also sets of bearings.

The second picture of the idler pulleys. They are riveted together, it may be easier to buy them.