I was on my mower the other day and a branch shut off the mower. When I started it it ran fine but when I went to go forward it shut off or when I went to engage blades it would shut off as well tested all switches with a mutimeter and they appear to work fine. So i bypassed the neutral switch and I was able to go forward again but again when I went to engage the blades I could hold them on but when I locked them in it would quit. So again the switch that runs the power shoot in rear works when you just have the key on but when you start the mower and push the switch it shuts the mower down.. Im pulling my hair out as to why this is happening. any help would be great thanks
Dusty
