engine

GREETINGS to all Dixie Chopper mower owners! If you're new to the forum, please reply to this thread and introduce yourself and your mower (that is, if your mower have a name). Maybe attach a photo or two of your mower and show off your pride and joy. Also, if you haven't done so already, you...

Good morning. I have a White Outdoor Transmatic Lawn Tractor Model 606, with a Kohler engine Model SV7103 Spec# SV710-0011 Serial # 370108653. My issue is It is hard to start. Turn the key and I can hear the soloonode click and the starter engage, but not turn the engine. Repeat and no turn...

engine shuts off when I engage pto. the 3 light on circuit go out at the same time. tried a new pto switch and brake safety switch but did the same.

I took the engine off a John Deere lt155 and put it on a swisher pull behind. I pulled all the wiring harness, relays, and safety switches off and I can get the engine to run but I want to eliminate all the wiring that I can. I just want to be able to start and stop the engine with the key...

2020 GY6 161QML engine IPL with part numbers needed.

How do you remove the oil drain hose on the Toro Engine 24.5 hp without breaking the holder. I have tried pulling down on the hose nothing moves. Tried using pliers to turn the hose and pulling down still not working. Toro support is a joke for any help.

Update - Toro MX4250 74760 315002651 June 2015 24.5hp 708cc Loncin 2P77F engine. After checking everything, I bought new coils. It started right up and I ran it for a few minutes and figured all was good. Went out a couple hours later and would not start. It does have spark, good compression and...

engine shuts off when I engage pto. the 3 light on circuit go out at the same time. tried a new pto switch and brake safety switch but did the same.

I have changed a lot of oil in my days, most of them pretty old small engines and a lot in pretty poor condition (Troy Bilt tiller rehab is my current hobby). Had a first today, a friend had me pick up his Craftsman T130 riding mower and try to bring it back to life. It had been parked under...

Friend of mine called and asked me if I ever heard of this situation and if I could explain it. He has a Bobcat zero turn with a 24 hp Koehler engine. He drained the oil and when he started to add new oil, he could hear bubbling noises coming from his carb. The noise sounded like someone was...

Can anyone tell me what these are for? (circled) This is my exact engine and application - 128M02-0423-F1 I bought a NOS Briggs and Stratton short block engine that included a gasket set. PS Since originally posting this I was able to figure out some of it. One is the intake manifold to...

Hi I have a Stiga ride on with a B&S 12hp motor, that is seized. I have been offered a Honda GXV 390 13HP motor. Is this a feasible swap, in terms of mechanical mounting? Thanks