briggs

Greentree is saying this product is 8.40in tall and 7.35in wide. I've never seen one that tall, with the big primer hole. I don't have the model number, because the QR code doesn't work. It's only got a serial number 12 0410 54 72598. 140cc 550 EX(I think)

Hi guys, i got a used small lawn mower last year. Since the previous owner had already tried to repair the mower, everything was no longer in its original condition. Engine model is Briggs Intek 825 (Engine No 122607-0210-E1) OHV. Since it wouldn't start, I carried out the following repairs...

New carburetor, fuel and fuel filter has spark but won’t crank and run. any help would be greatly appreciated 🇱🇷🇱🇷

I’m working on this Recycler 20334 with a 7hp Briggs, not an OHV engine. It usually starts pretty well on the rope, but not the typical 1 pull start. This mower has an electric start too. I usually will start on electric, but it cranks and cranks and cranks. I’ve removed and cleaned the carb...

Engine model 44R67. I was using it today for a couple hours, then took a break for a snack and when I went back out it would not even turn over. it didn’t appear that power from the battery was getting to anything; it didn’t click it didn’t even show the hours in the little window - just nothing...

Head bolt torque specs

uno online Need new push mower. Most have Briggs And Stratton engines and I need advice from someone who has used one lately. Almost all B&S engines discharge the exhaust to the front end of the mower. The user would basically always be walking into the exhaust fumes, which doesn't seem...

Can anyone tell me what these are for? (circled) This is my exact engine and application - 128M02-0423-F1 I bought a NOS Briggs and Stratton short block engine that included a gasket set. PS Since originally posting this I was able to figure out some of it. One is the intake manifold to...

Craftsman DT4000 Briggs & Stratton Intek 24 HP Model 445677- 0413-E4 TL/DR: After misdiagnosis of an internal engine rattle, I removed engine and opened crankcase to find nothing wrong inside. Motor has 600 hours. Has had regular oil and filter changes and air cleaner service. Has good...

Hi there all :) I've got a Murray (Yard King) that I've loved and tried to look after that goes great. Unfortunately my repairer has just told me that my spindles (axles) are both really worn and that the part is discontinued :-( I really don't want to get rid of this mower. Does anybody know of...