Results 1 to 3 of 3
Thread: dixon grizzly 60 "zerks"
-
07-31-2012, 08:50 AM #1
- Join Date
- Jul 2012
- Posts
- 3
- Location
- Alabama
- Mower
- Dixon
dixon grizzly 60 "zerks"
I bought a used mower..some of the grease fitting will not take grease
They are drive in fittings... how do I remove them and should I replace them with drive in or self tapping fittings or tap an hope I get all the metal out?
-
Advertisement
-
08-01-2012, 10:54 PM #2
- Join Date
- Apr 2012
- Posts
- 142
- Location
- Georgia
- Mower
- Husqvarna
Re: dixon grizzly 60 "zerks"
-
08-02-2012, 02:35 AM #3
- Join Date
- May 2010
- Posts
- 5,119
- Location
- Kansas, Butler county, Just east of DooDah
- Mower
- CTL
Re: dixon grizzly 60 "zerks"
The zerk 'clearing' tool will work most of the time...
But removing and poking around & spraying with solvent, and flushing out, Then replacing a zerk , sometimes is needed...
Removing the pressed in type, then 'CAREFULLY' drill & tap, should always work...
KennyV
Similar Threads
-
2006 dixon grizzly 60
By rebel1955 in forum Mower Buying & PricingReplies: 0Last Post: 07-31-2012, 01:01 AM -
Mower deck Does anyone have a Dixon 4516K 50"?
By WelderJohn in forum Husqvarna & Dixon ForumReplies: 0Last Post: 06-19-2012, 11:36 PM -
Dixon ZTR 4424 vs. Craftsman 42" w/Honda engine
By mzamborini in forum General Mower DiscussionReplies: 0Last Post: 05-10-2012, 08:42 PM -
Husqvarna 6021P (21") 149cc 3-In-1 Push Lawn Mower "thumbs up?"
By powerdrillsource in forum PollsReplies: 1Last Post: 05-09-2012, 11:28 PM -
Buying Advice What is a good walk behind 33"-36" mower (33"onsale at sears now)
By blownalcohol in forum General Mower DiscussionReplies: 2Last Post: 04-22-2011, 01:21 PM


LinkBack URL
About LinkBacks
Reply With Quote

