Bill Tynes
Member
- Joined
- May 9, 2011
- Threads
- 4
- Messages
- 12
I bought an '02 Snapper RER with a 17.5 Briggs with a broken clutch/brake cable. I have replaced the cable and rubber drive disc but now when I press the brake I get a terrible scraping sound from the disc area. It didn't do this before I replaced the disc. I've replaced them before and I think I put everything back the way it came off. Not much to it. I'm at a loss as to what it might be.
Also when I release the clutch, the mower hesitates before moving. This is why I replaced the disc. I thought the old one might be worn to the point it was slipping. I also have to push the brake all the way down to stop. Do I need to adjust the cable or something? Thanks in advance.
Billt23
Also when I release the clutch, the mower hesitates before moving. This is why I replaced the disc. I thought the old one might be worn to the point it was slipping. I also have to push the brake all the way down to stop. Do I need to adjust the cable or something? Thanks in advance.
Billt23