ChemicalJordy
Forum Newbie
- Joined
- Jun 14, 2012
- Threads
- 1
- Messages
- 3
The drive belt on my TB 210 or 230 keeps coming off. I installed a new belt, same problem. There doesn't seem to be any way to adjust the clutch cable. The pulley at the transmission seems to fall back too far at rest, allowing the belt to slip off. It looks like I need the pulley to be a little farther away at a resting position, creating more tension on the belt so it won't come off. There is a spring that helps the transmission move up and down but there seems to be no way to adjust it. I've uploaded a picture.
The pic was taken standing in front of the mower. It is obviously a front wheel drive. The pulley shown seems to need to be pushed up and towards you a bit to keep the belt from slipping.
The TB is the mower I use for those "crap" yards that are like mowing dirt and rocks. I need this mower to work because I don't want to use my nice one on bad rough uneven yards with mostly rocks and dirt.
Thanks for any help you can give me.
Jordan
The pic was taken standing in front of the mower. It is obviously a front wheel drive. The pulley shown seems to need to be pushed up and towards you a bit to keep the belt from slipping.
The TB is the mower I use for those "crap" yards that are like mowing dirt and rocks. I need this mower to work because I don't want to use my nice one on bad rough uneven yards with mostly rocks and dirt.
Thanks for any help you can give me.
Jordan
Attachments
Last edited: