Hi please can anyone assist, bear with me on my description I hope it makes sense
I own a Toro 212-5sb s/n 32-12B501?..10439?
It has been running perfectly up until last night when I removed serviced and replaced the drive pulleys underneath, I also removed and serviced the brake on the gearbox
Now I find that when the engine is running and I select a gear (slips into gear smooth)? will drive for a meter or two ?.stop to select another gear ?but it has stuck in that gear , it will not let me select any gear ?the only way I can release the gears is by switching off the engine ?this happens in all gears no matter which I select first forward or reverse ?..now I see there are wires leading from my gearbox ,,,this seems to be a safety device that only allows me to start the engine in neutral (is that correct)?lso is there a balance in setting up the break / clutch ?..have I done anything by my servicing ?
Please any ideas ?..p.s what does the SB part of the serial number mean
Neil
:smile:
I own a Toro 212-5sb s/n 32-12B501?..10439?
It has been running perfectly up until last night when I removed serviced and replaced the drive pulleys underneath, I also removed and serviced the brake on the gearbox
Now I find that when the engine is running and I select a gear (slips into gear smooth)? will drive for a meter or two ?.stop to select another gear ?but it has stuck in that gear , it will not let me select any gear ?the only way I can release the gears is by switching off the engine ?this happens in all gears no matter which I select first forward or reverse ?..now I see there are wires leading from my gearbox ,,,this seems to be a safety device that only allows me to start the engine in neutral (is that correct)?lso is there a balance in setting up the break / clutch ?..have I done anything by my servicing ?
Please any ideas ?..p.s what does the SB part of the serial number mean
Neil
:smile: