Poulan Pro Wiring Harness Help

davbell22602

Lawn Addict
Joined
Nov 27, 2011
Threads
152
Messages
1,324
Fridgadaire
M- pr185h42st
S- 033100 c 012638
MFG ID - pr185h42sta

18.5 Intek Briggs, 42in hydro

I got this not running. The PO pulled all pins out of the connector going the key switch. I'm unsure where the blue, double black wire and double black goes. Pins G, M, and B are still empty.

I tried using the wiring schematic form this model but colored wires dont match up. pr18542stc
 
Last edited:

davbell22602

Lawn Addict
Joined
Nov 27, 2011
Threads
152
Messages
1,324
Same diagram as what I'm working with now. Thanks anyways.
 

Lawnmowerman2

Member
Joined
Apr 2, 2012
Threads
0
Messages
28
it looks like the diagram is ayp.. it will fix your problem..
 

davbell22602

Lawn Addict
Joined
Nov 27, 2011
Threads
152
Messages
1,324
So which hole does the blue wire go to in the connector for the ignition switch?
 

Lawnmowerman2

Member
Joined
Apr 2, 2012
Threads
0
Messages
28
So which hole does the blue wire go to in the connector for the ignition switch?

I have the color code and where all the wires go leading from the starter key switch, to the connector.. and the wires coming from the engine to the back side of the connector.. the diagram is at my shop.. will be there tomorrow after 1:00pm.. customer coming to pick up his craftsman.. what what size is your engine.. feel free to call me at 1 832-329-2778..
 

davbell22602

Lawn Addict
Joined
Nov 27, 2011
Threads
152
Messages
1,324
Here's pic of what colored I have.

S5004081.jpg
 

davbell22602

Lawn Addict
Joined
Nov 27, 2011
Threads
152
Messages
1,324
I have the color code and where all the wires go leading from the starter key switch, to the connector.. and the wires coming from the engine to the back side of the connector.. the diagram is at my shop.. will be there tomorrow after 1:00pm.. customer coming to pick up his craftsman.. what what size is your engine.. feel free to call me at 1 832-329-2778..

18.5 vtwin briggs intek hydro 42 inch
 

davbell22602

Lawn Addict
Joined
Nov 27, 2011
Threads
152
Messages
1,324
Got this running but it will stay running when the parking brake is on. When I release the parking brake and clutch pedal the mower dies. I guess thats bad clutch pedal switch. It will start with the key in park. Found a fuse that came out in 2 pieces. The guy said he thought the fuel solonoid was bad. Also the battery is bad as it will only start with a 740 amp jumper start box.
 
Top