not a clean cut in the middle?

fastback

Well-Known Member
Joined
Apr 11, 2011
Threads
13
Messages
483
Russ no problem.

The reason I mentioned the pulley is one time I had a problem with a double drive pully on my 96 Craftsman. The stacked pulleys were surposed to be solid but the weld between the two broke allowing the top pulley to slip on the spindle. On that machine I had to replace the spindle as well as the pulley because the free pulley had caused damage. Oh, the cause of the problem was that I hit a large section of tree root. I thought everything was alright but then I found a skip in the cut. Hope this helps.
 

bubba827

Member
Joined
Mar 4, 2012
Threads
5
Messages
17
Ok I will check into the middle spindle,,thanks for all the input
 

bubba827

Member
Joined
Mar 4, 2012
Threads
5
Messages
17
ok i did 2 things .......srry about not getting back sooner but i went back to the regular blades and replaced the center pulleys and i will be dammmed if she went back to cutting grass and making the yards look like carpet.......Thanks again for all the input....happy cutting
 
Top