Kamikazi117
Forum Newbie
- Joined
- Sep 24, 2011
- Threads
- 1
- Messages
- 3
I bought a montgomery ward rider with an 11hp briggs motor on it.
Got it home and had an 18hp Briggs twin ii motor sitting around and swapped it for
the 11hp got it running good with only having the starter wires hooked up.
i was letting the gas run out to have it turn off. i didn't have the little 2 wire plug, plugged
in because i had to extend the wires. i just wanted to see if it would run.
well when i extended the wires. and plugged it in and tried to start it, it won't start now.
i unplugged it and still no fire.
Got it home and had an 18hp Briggs twin ii motor sitting around and swapped it for
the 11hp got it running good with only having the starter wires hooked up.
i was letting the gas run out to have it turn off. i didn't have the little 2 wire plug, plugged
in because i had to extend the wires. i just wanted to see if it would run.
well when i extended the wires. and plugged it in and tried to start it, it won't start now.
i unplugged it and still no fire.