Engine cracked block

CKM

Forum Newbie
Joined
May 2, 2018
Threads
1
Messages
1
Anyone ever try to repair a cracked block Kohlor 20 hp with JB weld ?
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,705
Done it a few times.
Not the best of fixes and after a while it will weep
surfaces must be surgically clean.
The top plate must be in very good condition if the holes are the slightest bit flogged oval replace the top plate.
Drill a hole about 1/8" in front of the visible tip of the crack.
If the crack has forked, drill all the tips
Make sure the bolts in the top plate are tight, they loosen up from vibrations on some Courage engines which is why it cracked in the first place.
Check that they are tight every season.
Got one in a ball clubs mower been going for 3 years now
Another one with he cricket club about the same age.
Check the oil level regularly as it will weep from the repair and wipe it down regularly so you can keep a check on it.
 

Luffydog

Well-Known Member
Joined
Jan 31, 2018
Threads
6
Messages
566
Won't hold just buy you sometime if it's yours if not be up front and honest let them know that a replacement engine might be needed or let them know the case and ask them what they want you to do that you and not responsible for it they want to take the short cut.
 
Top