Major FUBAR
Forum Newbie
- Joined
- May 2, 2018
- Threads
- 1
- Messages
- 3
If this has already been a thread I couldn’t find it when I searched it , maybe using the wrong keywords
I recently got a 2008 mtd yardman riding mower , that was sitting since 2011. I replaced the carb, ignition switch , cylinode , fuel filter , and working on the deck drive belts. After I replaced the belt, the pto blades were engaged at start up without PTO being on. When I lower the deck to four and lower the blades turn off and the pto doesn’t have any affect.
What adjustment do I need to make for this to happen?
Thanks
FUBAR
I recently got a 2008 mtd yardman riding mower , that was sitting since 2011. I replaced the carb, ignition switch , cylinode , fuel filter , and working on the deck drive belts. After I replaced the belt, the pto blades were engaged at start up without PTO being on. When I lower the deck to four and lower the blades turn off and the pto doesn’t have any affect.
What adjustment do I need to make for this to happen?
Thanks
FUBAR