Results 1 to 2 of 2

Thread: Success

  1. #1

    Join Date
    Nov 2017
    Posts
    3
    Location
    Illinois
    Mower
    Ranch King...MTD Yard Man...Husqvarna 65021 CHV

    Success

    Well it cost me a grand total of just under 5 bucks but I got the Husqvarna going. I went and got a quart of SAE 30 and a can of carb cleaner I had to reattach the pull rope since it had broken at the knot, pulled the carburetor off carefully removed the bowl and float with float needle then sprayed everything out both ways with the carb cleaner and chased it all with air and surprisingly to me there were no removable parts as everything appeared to be pressed in and no idle screw to mess with either I then let the mower run for several minutes to warm up the oil before I dumped it and refilled with fresh I then took the blade off and gave it a quick cleanup and edge. I am happy that the mower starts very easily and cuts like a champ

  2.  

  3. #2
    BlazNT's Avatar
    Join Date
    Apr 2012
    Posts
    5,408
    Location
    Missouri
    Mower
    RZ5424

    Re: Success

    Congrats. Job well done.
    Chuck
    We Do Not Stop Playing When We Grow Old
    We Grow Old If We Stop Playing

Similar Threads

  1. I tried to pull up information up but no success.
    By misha84 in forum Briggs & Stratton Forum
    Replies: 2
    Last Post: 07-19-2016, 10:43 PM
  2. SUCCESS!!!!!
    By hrdman2luv in forum Craftsman Forum
    Replies: 9
    Last Post: 04-07-2015, 05:11 AM
  3. Success in freeing up a seized blade bolt
    By maguire in forum New Members
    Replies: 2
    Last Post: 10-13-2012, 09:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •