Missing O-Ring?

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
I attempted to order a new tube and the replacement part from Briggs doesn't match what I have on mine. The dipstick tube shown on the parts diagram only secures at the top whereas mine has two holes in which it is secured to the crankcase as well. I guess if I can find that part I will replace the whole thing as well.

Try these ........ Might want to call ahead & verify, this tube has 2 mounting points

View attachment 35853...View attachment 35854...View attachment 35855...14 tube.PNG

https://www.ebay.ie/itm/Briggs-Stra...2101-692093-/332517312155?hash=item4d6b93869b

sometimes the diagrams by 3rd parties dont show the right drawings ... I would try (ereplacementparts.com) first.
 

cruzenmike

Well-Known Member
Joined
Feb 10, 2017
Threads
57
Messages
852
Try these ........ Might want to call ahead & verify, this tube has 2 mounting points

View attachment 35853...View attachment 35854...View attachment 35855...View attachment 35857

https://www.ebay.ie/itm/Briggs-Stra...2101-692093-/332517312155?hash=item4d6b93869b

sometimes the diagrams by 3rd parties dont show the right drawings ... I would try (ereplacementparts.com) first.

Thank you Boobala. This is what mine looks like. I will have to call and verify. I also found the o-ring that is shown on the bottom end in the hole where the dipstick tube goes. Local dealer has it for $4 so I will just pick it up and replace everything. Hopefully everything buttons up nice and tight.
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
Thank you Boobala. This is what mine looks like. I will have to call and verify. I also found the o-ring that is shown on the bottom end in the hole where the dipstick tube goes. Local dealer has it for $4 so I will just pick it up and replace everything. Hopefully everything buttons up nice and tight.

Keep us up-dated .......
 
Top